Water Quality & Instrumentation - Page 735

Manufacturer: JYP

Usually the product will be sent in 2-5 working days and takes about 3--9 business days to reach you Size:25.4*1.1MM T：R=50:50 The incident angle: 45 degrees Wavelength: 600-900NM Coating: one side is coated with AR film, the other side with splitting film

Manufacturer: COLE-PARMER Brand: Cole-Parmer

The Ag/AgCl combination reference electrodes have an impact-resistant epoxy body. Electrodes provide a fast, stable response and are ideal for prolonged readings. Gel-filled design requires virtually no maintenance. 127 mm L x 12 mm diameter with maximum 176F (80C) temperature. What's Included: 3.3-ft (1-m) cable with BNC connector. Combine durability with reliability Epoxy-body housing resists impact Ideal for general purpose lab and field applications Compatible with most brands of pH meters

Manufacturer: nobrandname Brand: nobrandname Model: 91001

Gates Rubber Company 91001 Refractometer

Manufacturer: Tuthill Brand: Fill-Rite Model: KIT320MA

Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.

Manufacturer: Checkline Brand: Checkline

Liquid Temperature Probe

Manufacturer: Unico Brand: Unico Model: S-1200-102

The Unico Single Square Cuvette Holder (#S-1200-102) is a single cell holder with a base for 10 mm square cuvettes. The holder is designed for use with S1200 Series Visible Spectrophotometers.

Manufacturer: Racine Federated Brand: Hedland Model: H624-016

EZ-View Flow Meters For Water. 1/2 inch ports. EZ to install, in any position. Polysulfone bodies for standard applications. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Polysulfone plastic body, piston and cone. Common parts are Spring: T300-series stainless, Indicator Ring: Buna N, Pressure Seals: Buna N, Fittings: C360 brass, Limit Indicators: Polypropylene, Retaining Ring: PH15 – 7MO stainless.

Manufacturer: Extech Brand: Extech Model: FL705

Extech FL705 ExStik Replacement Fluoride Electrode Module For Extech Model FL700 Fluoride Meter Replacement electrode for FL700 meter, Application Replacement Electrode For Fl700 Meter, Features Flat Surface Requires A Small (10Ml) Test Sample, For Use With Fl700 Fluoride Meter, Includes Fluoride Electrode, Manufacturers Warranty Length 6 Months.

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument

Huanyu Instrument Huanyu Instrument® mainly provides instruments and tools. We provide voltage customized services, specific requirements can be contacted by email, we will respond promptly.After your order is confirmed, the product usually takes 7--13 business days to arrive to your hand. Product description This is a Zahn type Cup Viscometer which are used to measure the flow behavior of liquids such as paints and is in very nice condition.Applicable to the construction site to quickly measure the viscosity of the paint to be sprayed; more widely used in electronic products, plastic coatings industry. The cup and Iwata spray gun together become essential plant construction tools. 1:using a suitable solvent to wipe clean， when before or after the cup be used. 2:put the cup into the container body 1- 5 minutes, to achieve thermal equilibrium of the cup body,then put the cup body vertical lift from the feedstock, the action should be fast and stable. 3:Timekeeping when the upper end of the cup leave from the surface of Liquid,and liquid should be kept out of the cup vertically, with the surface distance of not more than 150mm. 4:Stop timing when the first breakpoint occurs, and the difference between the two measured values should be less than 5% of the average. NOTE Please give us your phone number which is to ensure a smooth and safe delivery. And we can also send the product to you as soon as possible If you have any questions , please feel free to contact us.

Manufacturer: PUSHEN Brand: PUSHEN

Product Parameter Zahn Cup is a small U-shaped cup suspended from a looped wire.  This method is ideal for measuring the consistency of paints, varnishes and similar products.  Simply dip the cup into the product to be measured, lift it out and measure how long it takes for the contents to empty through the orifice.   Each cup has a 12-inch loop handle to allow the cup to be dipped by hand into a liquid container. At the center of this handle is a finger-ring for holding the cup in a vertical position during use. Results should be reported in Zahn-Seconds at a specified temper- ature for a particular cup. Note All products have been checked and packaged in good condition before shipping After your order is confirmed,the product will be sent to your hands for 7-13 workdays. If you have any question, please feel free to contact with us . We will try our best to give you a satisfactory solution. Please take a few seconds to leave a great feedback if you are satisfied with our product