Water Quality & Instrumentation - Page 76

Manufacturer: Varsal, Inc. Brand: Varsal Model: 450-39-Q5

Varsal manufactures UV-VIS-NIR spectrophotometer cells and cuvettes, including micro-cells. Our unique fire-fused production technology assures long lasting, easy to clean, high performance cells. Varsal cells can be used with all commonly used spectrophotometers to measure absorbance or transmission and they comply with all international standards. Depending on the spectral range to be analyzed, Varsal spectrophotometer cells are available in optical glass, quartz and IR quartz glass. Our technical ability to produce cells that meet the demanding specifications of instrument manufacturers is only surpassed by Varsal's customer service and on-time delivery. Wavelength zone: 200/800 newton meters. Percentage transmission: >80%@360 newton meters. Matching tolerance: within 0.3%@360 newton meters

Manufacturer: Racine Federated Brand: Hedland Model: H605B-002

Flow Meter For Water and Other Liquids. Direct reading. Install in any position. 360 degrees rotatable guard/scale. Easier-to-read linear scale. No flow straighteners or special piping required. Relatively insensitive to shock and vibration. Good viscosity stability. Temperature up to 240 degrees F. Accuracy +/-2 percent full scale. Repeatability +/-1 percent. Special scales available. Calibrated for 1.0 S.G. Materials: C360 Brass body, piston and cone. Common parts are Spider Plate: T316 SS, Spring: T302 SS, Fasteners: T303 SS, Pressure Seals: Viton, Guard: Polycarbonate, Retaining Ring: T316 SS, Retaining Spring: T316 SS, Indicator and Internal Magnet: PPS / Ceramic, Guard Seal / Bumper: Buna N, Scale Support: 6063 - T6 Aluminum and End Caps: Nylon ST.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: 716814

Hi 9813-6 is a versatile, water resistant multipara meter portable meter specifically designed for Agricultural applications such as hydroponics, greenhouses, farming & nurseries. it features an extra large LCD that clearly displays the parameter being measured as well as calibration instructions. Calibration is fast & easy with knobs located on the front panel of the instrument. Hi 9813-6n is designed for simplicity of use in taking pH, ms/CM, ppm & temperature in the degreec scale measurements. Hi 9813-6 includes all the features of the hi 9813-5 while incorporating our exclusive Cal Check feature. Cal Check allows the user to easily Check the probe calibration Status at any time. Comes with the hi 1285 series pH/EC/tds/temperature probe. This probe features a Fiber junction & gel electrolyte making it ideal for fertilizer solutions.

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, AC Volts, LED, W72xH36mm, 4-Digit, 0-500V Input, Relay Output, 100-240 VAC

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Automatic buffer recognition, absolute and relative ORP measurements, and automatic temperature compensation ensure measurement accuracy. Model pH/ORP 350 (05802-14) comes equipped with an isolated and reversible 4 to 20 mA output that allows to be used as a proportional output. Cole-Parmer pH/ORP controller and transmitter offer features found in more expensive models. Backlight LCD for clear measurement display Automatic buffer recognition of US and NIST buffers Universal power supply input from 100 to 240VAC Easy-to-install 1/8-DIN compact plastic casing

Manufacturer: Cannon Instrument Brand: CANNON Instrument Model: 9722H77EA

The Cannon-Ubbelohde CUSMC-450 calibrated capillary-style viscometer has a 500 to 2,500 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 2.5 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The CUSMC-series size 450 viscometer uses a 240mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and developmen...

Manufacturer: Cannon Instrument Brand: CANNON Instrument Model: 9722H65EA

The Cannon-Ubbelohde CUSMC-200 calibrated capillary-style viscometer has a 20 to 100 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.1 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The CUSMC-series size 200 viscometer uses a 240mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, ...

Manufacturer: Thomas Scientific Brand: BYK-Gardner Model: 571

The BYK-Gardner 571 replacement empty bubble viscometer sample tube has a 9mL capacity with a 10.65mm diameter and is suitable for testing fluids such as resins and varnishes. It has printed marks at 100 and 108mm from the bottom of the tube for timed tests. Sample fluid viscosity is determined by comparing bubble rise time to those of bubble tube standards (sold separately) and choosing the closest match. This grade A bubble viscometer sample tube includes a cork stopper for sealing a sample. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National Institute of Standards and Technology (NIST), International Standards Organization (ISO), and ASTM International...

Manufacturer: Flomec Flow Meters Brand: Flomec Flow Meters

Flomec 01N series 10 - 100 lpm turbine water flow meter made from nylon rated to 150 psig pressure with 1" (F)NPT connection. Brand Name|Flomec#MFR Part Number|113255-5#UNSPSC|41112504#Item|Water Flow Meter#Connection Size|1 Inch#Flow Rate|10 - 100 lpm#Pressure Rating|150 psig#Connection Type|(F)NPT#Display Type|4-Digit LCD#Maximum Viscosity|5 cP#Sensor Type|Magnetic#Strainer Type|55 mesh#Power Source|(2) AAA Battery#Temperature Rating|14 - 131 deg F#Material|Nylon#Standard/Approvals|CE Certified

Manufacturer: LaMotte Brand: LaMotte Model: 1740

Use it to test pH and ORP with interchangeable flat surface sensors. The most versatile PockeTester ever! Readings are not affected by sample color or turbidity. Unit identifies which probe is in use and retains calibrations. Includes 100 reagent tablets at almost half the price of similar Chlorine ISE reagents