Water Quality & Instrumentation - Page 780

Manufacturer: S Brand: CAMPELIFY

Specifications : Temperature measuring range: -10℃~50℃/-14℉~122℉ Humidity measuring range: 5%~98%RH Temperature Accuracy: ±1.5℃ Humidity Accuracy: ±5%RH（10%~40%RH）;±3%RH（41%~80%RH） Temperature Resolution: 0.1℃ Humidity Resolution: 0.1%RH Sampling Frequency:2.5times/sec -℉ / ℃ Selection; Auto/Manual Power Off; Battery Indication/ Backlight Display - Data Hold Function; Max/Min Measuring; Temperature & Humidity Dual Display Tips: 1. This product has been calibrated before loading, don't change the parameters without the presence of professionals and equipment. 2. Amendment and maintenance must be kept by professionals not just doing it with reference to the manual. 3. Clean the unit with cloth only without any solvent or liquid. 4. Take out the battery if the unit is expect not to be used.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: PRIMO3

The Hanna Instruments Primo 3 is a total dissolved solids (TDS) and temperature tester for water quality applications, with automatic temperature compensation, automatic calibration, and automatic shutoff after five minutes of non-use. The meter is operated by two buttons at the top: one for TDS and one for temperature. It has a direct probe connection. Conductivity meters are commonly used in the water-quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research.Specifications Range 0 to 1999ppm (mg/L) and 0.0 to 60.0 degrees C Resolution 1ppm (mg/L) / 0.1 degree C Accuracy + or - 2% Full Scale / + or - 0.5 degree C Calibration Automatic, at 1382ppm Temperature compensation Automatic, 0 to 60 degrees C (32 to 140 degrees F), temperature coefficient equal to 2% per degree C Power source Two 1.5V batteries (included) Dimensions (meter only)66 x 50 x 25mm / 2.6 x 2.0 x 1.0" (H x W x D) Weight (with probe)363g / 12.8oz   p>H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, have low conductivity. More saline- or nutrient-rich solutions, such as seawater or fertilizers, have high conductivity. Conductivity measurements are often used with total dissolved solids (TDS) measurements, which are typically expressed in ppm (parts per million). TDS consist of dissolved minerals and salts. To determine the amount of TDS, conductivity is measured, and the result is converted to a TDS measurement. Different meters provide results for conductivity, TDS, or both, and the application determine...

Manufacturer: General Tools Brand: General Tools Model: DPH7011

' Digital pH Meter, Includes 4 AAA Batteries, Soaking Solution, Buffer Solutions pH 4 and 7, Case '

Manufacturer: Dynalon Brand: Dynalon Model: 227155

Flow Indicator. This flow indicator is transparent, leakproof, ultrasonically molded and fitted with a polypropylene ball. It allows an immediate visual indication of gas or liquid flow by means of the ball's rotation. The speed of the ball's rotation is dependent upon the flow of velocity. Can be used to connect tubing with different diameters from 6.5 to 10 mm ( 1/4" to 3/8" I.D.). Minimum flow detected is 10-12 liters/hour; maximum flow is 330-390 liters/hour. Maximum fluid temperature is 122° F (50° C).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Dwyer® Series WMT2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows simplicity and accuracy with wide flow ranges even in low flow applications. The meter is designed for long service life and relatively maintenance-free operation, even under adverse conditions. The magnetically driven, hermetically sealed register will not leak or fog and is completely separated from the water. The reed switch is activated by a magnet on the dial, which is directly proportional to the flow rate. The output is perfect for remote monitoring of flow rate or flow totalization, and can interface with PLC's, counters, data loggers, and SCADA systems. Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS. (Standard range shown in picture).

Manufacturer: AV Prime Inc. Brand: AV Prime Inc.

Features: Brand New in Box Ready to Be Operated Upon Arrival Six-in-one Meter: EC, CF, _C, _F, TDS, pH Easy Calibration of pH and TDS with just a Mini-screwdriver Automatic Temperature Compensation (without this, pH reading will differ as the temperature varies) Large, Triple Level Display Caps on Both Sides for Storage and Protection of Electrodes Suction Cups to Attach the Electrodes onto the Inwall of the Vessel, Tank or Reservoir etc. CE Certificated to Offer Safer and Precise Measurement Silicone Skin Case Could Protect the Meter from scratches Package Content: 1 x Six-in-one Meter 2 x Probes 1 x AC-DC Adaptor 2 x Suction Cups 1 x Silicone Skin Case

Manufacturer: Blue-White Brand: Blue-White Model: F30300P

F-300 series flow meters utilize a pitot tube pick up and a hard edged float design to provide a convenient and economic means of measuring water flow in a closed pipe system. The F-300 impact tube flow meter features a tough, one-piece machined acrylic meter body, corrosion resistant internal parts, and permanent screen-printed scale. You get all the strength and long service life required in most commercial and industrial applications. Flowmeters are installed after the filtration system in Commercial Pool applications. This enables the service persons, or Health Inspector to tell at a glance if the recirculating pump is pushing an adequate amount of water to ensure optimum water turnover (filtration).

Manufacturer: Blue-White Brand: Blue-White

F-300 series flow meters utilize a pitot tube pick up and a hard edged float design to provide a convenient and economic means of measuring water flow in a closed pipe system. The F-300 impact tube flow meter features a tough, one-piece machined acrylic meter body, corrosion resistant internal parts, and permanent screen-printed scale. You get all the strength and long service life required in most commercial and industrial applications. Flowmeters are installed after the filtration system in Commercial Pool applications. This enables the service persons, or Health Inspector to tell at a glance if the recirculating pump is pushing an adequate amount of water to ensure optimum water turnover (filtration).

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI3222-01

These Hanna Instruments benchtop metersfeature up to five-point calibration, on-screen calibration instructions, Cal-Check function, capability to log up to 400 samples, and a USB connection to download data. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in lab, industrial, and food applications. A large backlit LCD screen provides graphical instructions for calibration, and the Cal-Check function ensures proper calibration prior to taking a reading. Calibration is five-point, with either seven standard (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) or five custom buffers. A Good Laboratory Practice (GLP) feature displays the last calibration data. A hold feature freezes the display and records results and the meter can log up to 400 samples. The meter has a USB connection for downloading data to Windows. A pH meter, also called a sensor or tester, is a device used to measure the acidity or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some testers have an internal sensor, and may have a tip and body that fit inside of a container for measurement. A meter is commonly used in many different environments, from laboratories to field research and manufacturing facilities. Researchers, manufacturers, and hobbyists use a pH meter in aquaculture, agriculture, wine-making, and water-testing, and for scientific applications. Some pH meters may measure additional parameters such as dissolved oxygen (DO), conductivity (also called electro-conductivity or EC), temperature, total dissolved solids (TDS), salinity, resistivity, or oxygen reduction potential. Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) standard 9001.

Manufacturer: DIGITEN Brand: DIGITEN

This LCD controller can monitor water flow rate,total flow,can control quantitative flow.you can re-setting quantitative flow,when flow reach to the number that you set.the controller will send singal to valve,turn off water flow and alarm automatically. Fratures: Easy to install,size is small. Can connect to flow sensor,temperature sensor,solenoid valve.monitor gases,liquid flow.quantitative flow control,total flow alarm. Monitor real-time flow rate. Display temperature of the liquid.need to extra add temp sensor. Control quantitative flow.when flow reach to the presetting flow,system will output signal to solenoid valve(ON/OFF). Monitor total flow,total flow alarm. Password can protect setting value. When flowmeter is working,faucet dynamic display. You can set K constant for various of flowmeters. Specification: Working volt: DC24V¡À8V/1A Flow range:1-30L/min LCD size:3¡±,built-in backlight. Viewing Angle:0-120 degree. Solenoid valves working voltage:DC12V/0.3-0.5A(NC) Controller case size:103x77x35mm,Controller cutout size:98x73mm. Package Includes: 1 x LCD flow display controller 1 x G1/2" flowmeter 1 x G1/2" solenoid valve 1 x Temperature sensor 1 x Instruction