Surface Roughness Gauges - Page 4

Manufacturer: HTC Brand: Unknown

.125 D x 270 XXL RCH UNDERCUT EM AlTiN

Manufacturer: Darice Brand: Darice

A double ended stylus for embossing on cardstock. Perfect for cardmaking! Measures 5.25 end to end. Features wooden handle. Warning: Not a toy. For ages 3 and up.This product meets the large package requirement per UPS/FedEx. The estimated shipping cost will include this fee.

Manufacturer: Checkline Brand: Checkline

Glass Plate and Shim

Manufacturer: Mahr-Federal Inc. Brand: Mahr Federal

Diamond Surface Gage Probe, 0.0004 In/10micron m, For Use With 5RHK8, 5RHK9

Manufacturer: Starrett Brand: Starrett Model: SR200

The Starrett SR200 surface roughness tester is a portable or bench mounted device with contact operation used to measure and display ten surface roughness parameters, has an LCD screen, a stylus lift mechanism, a variable traverse length, an RS-232 port for data export, and stores up to 100 readings. The 2 x 3.25-inch/5 x 8.25cm (H x W) multi-line LCD screen displays roughness average (Ra), average peak to valley height (Rz), maximum profile peak height (Rp), total height of profile (Rt), material ratio (Rmr), peak count (Rpc), mean width of profile elements (Rsm), maximum peak to valley height (Rz1max), skewness (Rsk), and arithmetic mean slope (Rda). The filter used can be switched between 2CR and Gaussian. The stylus lift mechanism allows a vertical adjustment of 2"/50mm and rotation of the interchangeable pickup to different positions, including right angle or inverted, to measure features such as steps, large and narrow bores, grooves, and lands. The traverse length is adjustable from 0.010 to 1"/0.25 to 25mm. The pickup is inductive and has a range of 0.012μ"/300μm with a resolution of 0.04μ/0.01μm and an accuracy of 2% of reading + LSD μm. The force is 0.005 to 0.01oz./150 to 300mg. The diamond stylus has a tip radius of 200μ"/5μm. The operating temperature is 41 to 104 degrees F/5 to 40 degrees C with a maximum relative humidity of 80%. Storage temperatures are 32 to 122 degrees F/0 to 50 degrees C with a maximum relative humidity of 80%. The tester dimensions are 2.4 x 5 x 3.35 x inches/60 x 127 x 85mm (H x W x D) and the unit weighs 1lb/450gm. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The tester has an RS-232 port and 3'/0.91m cable to connect with a PC. The SR200 also comes with TalyProfile Lite software for Windows. After receiving data from the SR200, TalyProfile Lite can analyze, print, export as a .txt or .csv file, or save the data as a docum...

Manufacturer: Vetus Brand: LANDTEK Color: Black

I.Introduction: Specially used to take accurate measurement of the peak-to-valley height of the surface profile of the surface profile of blast cleaned surfaces. II.Specification: Display : 4 digits, LCD" Range: 0 µm to 800 µm (0 mils to 30 mils) Accuracy: ±5% or ±5 µm,(whichever is the greater) Resolution: 1 µm (0.1 mils) Metric and Imperial switchable PC interface: RS232C Measurement speed: >30 readings per minute Weight: 280 g Dimensions: 162 x 65x 28 mm (6.4 x 2.6 x 1.1 inch) Operating temperature: 0C to 50C,

Manufacturer: Phase II Plus Brand: Phase II Plus Model: SRG4500-200

The Phase II Plus SRG4500-200 deep groove stylus measures surface roughness in slotted or grooved workpieces. It is for use with the SRG-4500 surface roughness tester (sold separately). Phase II Plus manufactures precision measuring instruments, machine tools, and material testing equipment for industrial engineering and manufacturing environments. The company, founded in 1981, is headquartered in Upper Saddle River, NJ.

Manufacturer: Mahr-Federal Inc. Brand: Mahr Federal

Portable Surface Roughness Gage, Features Portable, 24 Selectable Parameters, Integrated Calibration Standard, Large Display, Programmable, Patent Pending Integrated Calibration Standard, USB Interface, PS1 detected w/o a Driver, Measuring Range Ra 1micronIn to 500micronIn/0.03micronm to 12.7micronm, Profile Roughness Profile Only w/Explorer Software, Number of Sampling Spans 1, 2, 3, 4, 5, Output Y, Power Supply Rechargable Battery Surface Testers and Gages5RHL0Evaluates 24 surface parameters with a memory capacity for 15 profiles, max. 20,000 results. Features automatic cut-off selection and code-protected settings. Integrated roughness standard.Surface Testers

Manufacturer: PERFECT FIT TECHNOLOGIES, INC Brand: PERFECT FIT TECHNOLOGIES INC. Model: SP4CS9889

SURFACE PRO 4 ANTIMICROBIAL CLEANSHIELD

Manufacturer: Checkline Brand: Checkline

Range: 0 - 500 microns (0 - 20 mils) / 0 - 1500 microns (0 - 60 mils) (PT-SPGCS Models) Accuracy: ± (5 microns + 5%) / ± (0.2 mil + 5%) The Positector SPG Surface Profile Gage is a precise, rugged tester designed to measure and record peak to valley surface profile heights. The PT-SPG is available in Standard (SPG1) or Advanced (SPG3) configuration. The standard model has a monochrome display, 250 reading memory and USB data output. The Advanced model adds a high contrast color LCD display, Scan Mode, Real-Time Graphing Bluetooth output and more   [custom1] Built-in Probe Cabled Probe Cabled Probe Probe Order Code PRBSPG PRBSPGS PRBSPGCS Application Blasted Steel Textured Coatings Measuring Range 0 - 500 µm (0 - 20 mils) 0 - 1500 µm (0 - 60 mils) Accuracy ± (5 µm + 5%) ± (0.2 mil + 5%) Tip Angle 60 degree* 60 degree Radius 50 µm (2 mils) 500 µm (20 mils) [/custom1]