Surface & Hardness Testing - Page 39

Manufacturer: Rex Brand: Rex

The TBKC-C Type C Durometer Test Block Kits with Certificates of Conformance is designed to give the user the ability to develop the proper "feel", and, while they are not to be used for calibration purposes, they enable the user to perform a quick check for proper durometer operation. A large variation would indicate the need for recalibration of the durometer being utilized. This should be done in accordance with the methods indicated in ASTM D-2240.

Manufacturer: Starrett Brand: Starrett Model: HT-2500-105

Replacement Impact Body For D Impact Device

Manufacturer: Rex Brand: Rex

The QC-A Type A Pocket Shore Durometer is so durable, the QC comes with a lifetime guarantee. The key to the gauge's durability is its sliding vernier scale- there are no cams, gears, or levers to wear out. This vernier scale holds the maximum reading, and is especially useful for testing in hard to reach areas. The vernier scale is marked in increments of 5 points, and with a little practice, one can obtain readings to within 1 point.

Manufacturer: tereninstruments Brand: tereninstruments

We use DHL and Fedex. Generally, it only needs 3 days to arrive America from China. The lead time is about 1-3 business days. Applications: Model HT6510F is suitable for the hardness measurement of sponge. Features: * Use "USB data output" and "RS-232 data output" to connect with PC. * Provide "Bluetooth data output" choice. Parameters: Parameters Displayed: Hardness Result, Average Value, Max. Value Measurement Range: 0~100 HF Measurement Deviation: less than 1 HF Resolution: 0.1 HF Spring Force: 455 gf Sensor Head Diameter: 25mm Sensor Foot Diameter: 80mm Auto Switch Off Battery Indicator: Low Battery Indicator Operating Conditions Temperature: 0 ~ 40 degree; Humidity: 10 ~ 90 %RH Power Supply: 4 x 1.5 V AAA Size (UM-4) Battery Dimensions: 162 x 80 x 80 mm (6.4 x 3.1 x 3.1 inch) Weight: 490 g (Not Including Batteries) Package includes: Standard Accessories 1* Main Unit 1* Carrying Case 1* Operation Manual Optional Accessories 1. Shore Hardness Tester Measurement Stand 2. Rubber Hardness Test Block (A / D Type ) 3. USB, RS-232C data cable with software 4. Bluetooth data out put with software

Manufacturer: Teren Brand: teren

Applications: Applicable to Die cavity of molds, Inspection of bearing and other mass produced parts on a production line, Failure analysis of pressure vessel, steam generator and other equipment, Inspection of installed machinery, permanent parts of assembled systems and heavy work pieces, Testing surface of a small hollow space, Material identification in the warehouse of metallic materials, Rapid testing in large range and multi-measuring areas for large-scale work piece. Features: * User recalibration function allowed. * Can communicate with PC computer for statistics and printing by the optional cable. * Backlight display, suitable for low light environment. * Manual or automatic shut down. * Low battery indication. Parameters: Display: 12.5 mm LCD with back light Materials: 9 different common materials Measuring range: 200 ~ 900 HLD Accuracy: Display error+- 0.8 % Repeatability: +-0.8 % Conversion: HL-HRC-HRB-HB-HV-HSD Memory: 50 data can be stored and re-readable Impact device: D Will handle, Weight: 75g Storage temperature: -30 ~ +60 degree Working Conditions: Temperature: -10 ~ +50 degree Humidity: less than 90 % Power supply: 2 x 1.5 V AAA size (UM-4) battery Dimension 146 x 65 x 36 mm Weight: 130 g Kindly notice: Weight Requirement： Workpiece≥11lbs(5Kg) can be tested on directly. Workpiece 6-11lbs(3 to 5Kg) should be fixed to a bearing or support. Workpiece≤4lbs (2Kg) should be secured to a stable support with coupling. Minimum Thickness: 3mm. Package includes: 1. Main Unit 2. Standard test block 3. Carrying Case(B09) 4. Operation manual 5. Small Support Ring 6. Cleaning brush

Manufacturer: Rex Brand: Rex

The TBK-A Type A Durometer Test Block Kit is designed to give the user the ability to develop the proper "feel", and, while they are not to be used for calibration purposes, they enable the user to perform a quick check for proper durometer operation. A large variation would indicate the need for recalibration of the durometer being utilized. This should be done in accordance with the methods indicated in ASTM D-2240. The kit consists of color coded test blocks each of which measures " x 2" x 2". The kit is supplied in a sturdy foam-fitted carrrying case with the true readings for each block on the inside cover of the case. At an additional cost, a certificate of conformance is also available for users who need documentation of tracibility to NIST. Single test blocks for other durometer scales are also available.

Manufacturer: Rex Brand: Rex

The TBK-A-M Type A & M Durometer Test Block Kit is designed to give the user the ability to develop the proper "feel", and, while they are not to be used for calibration purposes, they enable the user to perform a quick check for proper durometer operation. A large variation would indicate the need for recalibration of the durometer being utilized. This should be done in accordance with the methods indicated in ASTM D-2240. The kit consists of color coded test blocks each of which measures " x 2" x 2". The kit is supplied in a sturdy foam-fitted carrrying case with the true readings for each block on the inside cover of the case. At an additional cost, a certificate of conformance is also available for users who need documentation of tracibility to NIST. Single test blocks for other durometer scales are also available.

Manufacturer: Rex Brand: Rex

The RX-1600-A Type A Precision Dial Shore Durometer, Conforms to ASTM D-2240 is a precision instrument that features a full-sized dial face for readability to within 1/2 point. The RX-1600 offers the maximum accuracy available in a dial model gauge at a minimum cost.

Manufacturer: NDTT Brand: NDTT Model: HT-225A

NDTT HT-225A is a compact Concrete Testing Hammer, commonly used for testing of strength and hardness of various types of concrete materials. When testing the strength of concrete, the concrete test hammer uses a certain elastic force to transit the impact force of an impact hammer to the surface of concrete, its initial kinetic energy redistributes, a part of energy in the form of plastic deformation or residual deformation is adsorbed by the concrete, and another part of energy which is proportional to the surface hardness is transmitted to the impact hammer, making the hammer resilie to a certain height, then the strength of the concrete is derived from the proportional relation between the height of resilience and the concrete strength. With the merits of simple structure, easy correction, maintenance and repair, and portability, the concrete test hammer is widely used in civil engineering and construction industry for testing the strength of concrete. Compared to other non-destructive testers, the concrete test hammer is an economical and practical nondestructive testing instrument. HT-225A is used for testing the strength of various concrete members (slab, beam, column, truss) of normal building strength and bridge. The HT 225A is comparable with the Schmidt Hammer, Type N, this method of testing is covered by DIN 1048 and BS1881 part 202, referring to assessment of the rebound hardness of mortar which is directly related to the compressive strengths of the tested material. SUPPLIED WITH: Main unit HT225A, Grinding wheel, Conversion table, User manual, Protective carrying case. Please contact us with any questions about this product.

Manufacturer: Mahr-Federal Inc. Brand: Mahr Federal

Diamond Surface Gage Probe, Profile Small Bore, 90 Deg Conical, For Use With 5RHK8, 5RHK9