Surface & Hardness Testing - Page 49

Manufacturer: AXIS COMMUNICATION INC Brand: AXIS COMMUNICATION INC Model: 5505-791

F8001 SURFACE MOUNT WITH STRAIN

Manufacturer: PuriTEST Brand: PuriTEST

This is a new acid testing stone This stone is used to test 10K, 14K, 18K and silver Use this stone with acid solutions It measures approximately 1 7/8" x 1 1/2" x 1/4" (48 x 37 x 6 mm)

Manufacturer: Vetus Brand: VETUS INSTRUMENTS

Feature: Shore D Durometer,Rubber Hardness Tester Test range:0-100HA Standard:ASTM D2240,ISO7619 and GB/T531-1999 Specifications : Product Name:LX-A Shore Durometer LX-A Shore Durometer is designed for testing various rubber,elastomers and plastic products.Simple structure,easy operation,easy reading and with facility,high resolution and it is available in GB/T531-1999 ASTM D2240 and ISO7619.It can be adapted with SLX hardness test stand. Test range:0-100HA Available test range:10-90HA Dimension:115*60*25mm Stroke:2.5mm Tip Dimension:SR 0.79mm Net weight:0.16kgs

Manufacturer: Testex Brand: Testex

The X-Coarse Plus Grade (4-6.5 mils / 100-165 microns), Roll is used with a gauge to measure the surface roughness ("profile") of blast-cleaned steel. Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs.The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles.Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc.Easy to use, remove the protective paper from the tape and place firmly on the blasted surface. Apply moderate pressure with the Burnishing Tool over the circular cut-out in the tape. Remove the tape. The replica is now ready for measurement using the Snap Gauge.

Manufacturer: GSS Brand: GSS

GSS Tablet Hardness Tester Pfizer Type

Manufacturer: Tathastu Brand: Tathastu

Tathastu Tablet Hardness Tester MANSANTO TYPE

Manufacturer: MARS Brand: Mars

A fairly handy instruments for taking quick readings for the hardness of tablets. It is made of brass turned parts, heavily chrome plated, the scale is 0 to 20 kg and the index mark and division is in 1 kg reading. Scale adjustable for zero setting as per size of the tablets.

Manufacturer: Flexbar Brand: Flexbar

MicroinchTM; Comparator Plates. surface Roughness (Texture) Comparison Standards Made of solid Electroformed Nickel. The Largest variety of Standards available for assessing and specifying, by Symbol, the Degree of Roughness of Machined parts - including every machining method known every obtainable value. 17 Different Sets available. Each value Size is 16mm x 25mm (or 5/8" x 1"). Overall dimensions of each plate 25mm x 128mm (or 2-1/16" x 5"). Light in weight - Can be carried in Pocket. supplied in Plastic wallet. Model No. 16021, Grit/Shot Blast Comparator Maching Method: Grit Blasting/Shot Blasting. No. of Specimens: 8 Range Ra µm: 3.2-18 (Grit Blasting); 3.2-25 (Shot Blasting) Range AA µ": 128, 320, 520, 720 (Grit Blasting); 128, 420, 720, 1000 (Shot Blasting). N Numbers: 5-10 Manufactured to ANSI-B-46.1-1985. Each Set is supplied in rugged vinyl Case which contains a durable instruction card With valuable information in easily understood language. This enables the user to obtain best results when assessing Roughness or Finish by sight and touch. All 18 plates conform to S.A.E. and Mil specs.

Manufacturer: Flexbar Brand: Flexbar

MicroinchTM; Comparator Plates. surface Roughness (Texture) Comparison Standards Made of solid Electroformed Nickel. The Largest variety of Standards available for assessing and specifying, by Symbol, the Degree of Roughness of Machined parts - including every machining method known every obtainable value. 17 Different Sets available. Each value Size is 16mm x 25mm (or 5/8" x 1"). Overall dimensions of each plate 25mm x 128mm (or 2-1/16" x 5"). Light in weight - Can be carried in Pocket. supplied in Plastic wallet. Model No. 16023, Casting Comparator Maching Method: Casting No. of Specimens: 7 Range Ra µm: 0.8-5.0 Range AA µ": 32, 63, 125, 250, 500, 1000, 2000 N Numbers: 6-12 Manufactured to ANSI-B-46.1-1985 Each Set is supplied in rugged vinyl Case which contains a durable instruction card With valuable information in easily understood language. This enables the user to obtain best results when assessing Roughness or Finish by sight and touch. All 18 plates conform to S.A.E. and Mil specs.

Manufacturer: Labs Brand: Labs

i-SASEMOHs Hardness Scratch Test KitItem# SAS.ScratchUsed to determine concrete hardness.Allows for proper tooling selection to maximize production time and profit on the job.Scratch Test Kit Includes:4- Two sided picks and a grinding stone for sharpening.Included as well is a glass hardness plate and a magnet for calibrating.Comes complete with instructions