Leak Detection Tools - Page 31

Manufacturer: Industrial Scientific Brand: Industrial Scientific

Technical Specification Item Sampling Tubing Kit Diameter 1/8 in. Length 20 ft. Features Flexible Urethane, 3/16 OD For Use With Mfr. No. MX6 iBrid, Ventis MX4 Includes Coupler, Filter This listing is for each.

Manufacturer: Matheson Brand: Matheson

Detector tubes are formulated with high purity chemical reagents which absorb and react with the gas or vapor being measured. The reaction causes a colorimetric stain which varies in length to the concentration of the gas or vapor being measured. The length of stain is normally read directly off a scale printed on each tube.

Manufacturer: Bacharach Brand: Bacharach Model: 0019-7110

CO safety checks on combustion stack gas and ambient air levels. Quickly measures and displays low levels of CO 0-2,000 ppm. Replacement part for Pro 100 and Monitor III. Image shown may NOT be accurate - Some show devices instead of parts; This is a PART, not the whole device. .

Manufacturer: Besantek Brand: Besantek

The BESANTEK BST-MG03 Combustible Gas Leak Detector is used where LEL gas may exist.

Manufacturer: ARCO Brand: Smart Sensor Model: AR5750A

FEATURES A gas detector is a device that detects the presence of gases in an area, often as part of a safety system. This type of equipment is used to detect a gas leak and interface with a control system so a process can be automaticall shut down. A gas detector can sound an alarm to operators in the area where the leak is occurring,giving them the opportunity to leave. This type of device is important because there are many gases that can be harmful to organic life.Gas detectors can be used to detect combustible, flammable and toxic gases, and oxygen depletion, etc. This type of device is widely used in industry and can be found in locations, such as on oil rigs, to monitor manufacture processes and emerging technologies such as photovoltaic. They may also be used in firefighting. SPECIFICATIONS Gas Type: Refrigerant Gas Response Time: Instantaneous Warm up time:

Manufacturer: Bacharach, Inc. Brand: Bacharach Model: 0017-7002

A valuable instrument for measuring and adjusting the inlet and manifold pressure for gas heating equipment and appliances.

Manufacturer: Holdwell Brand: Holdwell

Range of Weight: 0-100kg or 0-220lbs Or 0 IB.00.00 oz-220 IB 00.00 oz Accuracy: 0.5% of reading Resolution: ±5g/0.01 IB/0.25 OZ Unit: KG/LB/OZ Power Supply: 9VDC Operating Temp: 32F TO 113F(0°C to 45°C) Platform Size: 8-3/4"X 8-3/4 223x223mm Batter Life: 30 hours continuous use

Manufacturer: Hioki Brand: Hioki Model: 9657-10

Measurable conductor diameter: 40mm. Primary current rating: AC 10A. Output voltage: AC 100mV/A. Amplitude accuracy (45 to 66 Hz): +/-1.0 percentrdg.+/-0.05 percent f.s. Phase accuracy (50/60Hz): within +/-3 degree . Residual current: 5mA (100A on forward and return). Frequency characteristic (accuracy deviation): within +/-3 percent at 40Hz to 5kHz. Maximum rated voltage to earth: 300Vrms (insulated conductor). Maximum allowable input: 30A continuous. Measures: 74mm width by 145mm height by 42mm depth.

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: RD300

RD300: Refrigerant Leakage Detector detects leakages from air-conditioning units and cooling systems. It's easy to use and is ideal for detecting leakages from air-conditioning units and cooling systems that use all standard refrigerants. The multi-colored LED light bar indicates the level of leaking refrigerant detected by the RD300. The built-in, bright LED convenience light located at the sensor tip illuminates dimly lit inspection areas. Complete with leak test bottle, 9V battery, and protective hard carrying case.

Manufacturer: Altair Engineering Brand: Altair Engineering

Technical Specification Item Lamp Cleaning Kit Diameter 3-3/4 Length 4-1/2 Width 3 Depth 2 Height 2 Status Indicator No Power Source No For Use With Mfr. No. 10165445, 10165446 Includes Solution Cleaner, Towel, Manual This listing is for each.