|
|
-
4.4 of 5.0 with 496 Reviews
SALE PRICE: $629.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 4116743
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 4116743
Fluke hard carrying case with rollers for power quality and energy analyzer.
-
4.4 of 5.0 with 42 Reviews
SALE PRICE: $629.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3889503
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3889503
Fluke TPS FLEX 24 flexible current probe, 45 to 3.0 kHz Frequency Range. Measuring range selectable per software: 2 to 200 A and 10 A to 1000 A. Peak current for sinusoidal currents, 480 A, 2700 A. Intrinsic error: 1 percent. Frequency range: 45 Hz to 3.0 kHz. Operating voltage: 600 V CAT IV Phase Error: 0.5 degrees. Jaw Opening: 61-centimeters length, 2-meter cable.
-
4.4 of 5.0 with 14 Reviews
SALE PRICE: $674.99 3% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-1587 T
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-1587 T
|
The Fluke 1587 digital insulation multimeter (also known as a multitester) is a true RMS, auto- and manual-ranging meter insulation resistance, current, voltage, and resistance for testing line insulation in telecommunications applications. The insulation test voltage settings of 50V, 100V measure resistance from 0.01 to 100 megohms. The meter also measures capacitance, frequency, and resistance. Temperature is measured using a K-type thermocouple (included). A diode test detects correct functioning of a circuit's diodes. A low-pass filter provides accurate AC voltage and AC frequency measurements on inverters and variable-frequency motor drives by blocking unwanted voltages. Live circuit detection increases user safety by preventing insulation tests when voltages exceed 30V, and auto-discharge of capacitive voltage increases user protection. An audible continuity sensor confirms a circuit conducts electricity. The LCD is backlit for readability in low light. A Hold function freezes the reading on the display. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 20 minutes of nonuse to conserve battery life or can be disabled for extended readings, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter included a set of detachable test leads, a remote probe, alligator clips, a hard case, and instructions. This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The display has a 6,...
-
4.4 of 5.0 with 9 Reviews
SALE PRICE: $719.99 11% OFF
Manufacturer: Fluke
Brand: Fluke
Model: 4542286
Manufacturer: Fluke
Brand: Fluke
Model: 4542286
The Fluke Series Battery Analyzer is ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications.
-
4.4 of 5.0 with 45 Reviews
SALE PRICE: $1,149.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 715
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 715
|
The Fluke 715 Volt/mA Calibrator delivers outstanding performance, durability and reliability. The calibrator is compact, lightweight, and easy to carry. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015-Percent and 1 mA resolution. Measure voltage output process signals from PLC’s transmitters. The 715 is designed to source or simulate a 24 mA loop current and source voltage to 100 mV or 10V. Features 24V loop supply with simultaneous current measurement, improved battery life, 250 ohm HART resistor with loop power, step and linear ramp output function and configurable zero and span settings. The calibrator’s enhanced voltage and current measure and source accuracy creates a highly functional tool. The 715 is compatible with the TPAK ToolPak magnetic hanging system (sold separately). Includes a protective yellow holster with test lead storage, instructions sheet (14 languages), single 9V alkaline battery, test leads and alligator clips, and NIST- traceable calibration report and data. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.
-
4.4 of 5.0 with 28 Reviews
SALE PRICE: $3,749.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 2452080
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 2452080
|
Fluke 726 precision multifunction process calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis. Measure or source pressure using any of 29 Fluke 700Pxx pressure modules. Source mA with simultaneous pressure measurement to conduct valve and I/P tests. Integrated pressure switch test allows you to capture the set, reset and dead band of a switch. Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis. Transmitter error percent calculation, interpret calibration results without a calculator. Perform fast linearity tests with auto step and auto ramp features. Power transmitters during test using 24 V loop supply and simultaneous mA measurement. Store frequently-used test setups for later use. Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing. HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation. Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement. New voltage input protection design for improved reliability. 3000 m operating altitude. EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 approved. Runs on 4 AA alkaline batteries. Current DC: 24 mA 0.01 percent + 2 mA. Resistance: 0.0 to 4000 O +/- 0.015 percent. Storage temperature: -20 degrees C to +71 degrees C. 726 including: 1 set of AC72 alligator clips, 1 set of stackable test leads, 1 set of TL 75 test leads, user manuals and NIST- traceable calibration report and data.
-
4.3 of 5.0 with 11 Reviews
SALE PRICE: $149.99
Manufacturer: Fluke
Brand: Fluke
Model: 4542299
Manufacturer: Fluke
Brand: Fluke
Model: 4542299
Provides power cord operation and charging for Fluke Series Power Quality Analyzers.
-
4.3 of 5.0 with 8 Reviews
SALE PRICE: $190.73 5% OFF
Manufacturer: Fluke
Brand: Fluke
Model: FLK-T3000 FC KIT
Manufacturer: Fluke
Brand: Fluke
Model: FLK-T3000 FC KIT
' Temperature Module, Wireless Temperature Monitoring, K Thermocouple, -328 Degrees to 2501 Degrees Temp. Range (F), Probe Connector Mini, Wire Length 3 ft., -200 Degrees to 1372 Degrees Temp. Range (C), Accuracy 0.50 Percent +/-0.5 Degrees C, For Use With FC 3000 Series Multimeter or PC3000 Series Adapter, Calibration Certificate Available Separately, Includes Bead Probe, Magnet Strap, Information Pack, Manufacturers Warranty Length 3 yr. '
-
4.3 of 5.0 with 42 Reviews
SALE PRICE: $234.00 1% OFF
Manufacturer: Fluke Calibration
Brand: Fluke
Model: P5543
Manufacturer: Fluke Calibration
Brand: Fluke
Model: P5543
To calibrate gauges with the pressure connection on the rear (e.g. panel mount gauges) In their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges at 90º. The maximum working pressure of this Unit is 10,000 psi (700 bar)
-
4.3 of 5.0 with 16 Reviews
SALE PRICE: $269.99 5% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FL62MAX+/T+PRO/1AC
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FL62MAX+/T+PRO/1AC
The rugged Fluke 62 MAX+ IR thermometer teamed with the full featured T+PRO voltage continuity tester and the easy-to-use 1-AC-II non-contact voltage detector, has everything you need to solve problems quickly. Use the IR thermometer to test for overheating in electrical devices, next use the electrical test tools to learn more about the problem safely and conveniently.
|
|