Gage Blocks

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613165-521

The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic, which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the m...

Manufacturer: Winters Brand: Winters Instruments Model: SSN515LF

Applications: To significantly lessen the damaging effects of pulsation on gauges, transducers, transmitters and pressure switches. Incorporates a sintered, porous 316 stainless steel snubbing element with a large surface area to ensure long term effectiveness. CRN Registered. Warranty: 1 Year. Operating Temperature: -65F to 650F (-53C to 343C). Operating Pressure: Maximum 10,000 psi (68950 kPa). Burst Pressure: 30,000 psi (206,850 kPa). Housing: Lead Free Brass. Snubbing Element: Sintered, porous type 316 SS. Retainer: 300 Series SS. Connection: 1/4" NPT Female x 1/4" NPT Male

Manufacturer: ABS Import Tools Inc. Brand: HHIP Model: 3402-0016

Precision Ground angles. For tooling setups, production and inspection. Four 11/32" holes. Hardened and Ground steel. Supplied in fitted case. Description?1pc- 45 degrees x 45 degrees x 90 degrees (3 x 3 x 5/16), 1pc- 30 degrees x 60 degrees x 90 degrees (2 x 3-3/8 x 5/16).

Manufacturer: CRA-Z-ART Brand: Cra-Z-Art

The Cra-Z-Art Bright Blox Super Builder Blocks 100 Pieces Features: * Encourages stacking skills in young toddlers; * Building creativity and imagination;

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611187-551

The Mitutoyo grade AS-2 rectangular gage block is made of steel, has a nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide material, and have a square or rectangular base. Each block ha...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611111-551

The Mitutoyo grade AS-2 rectangular gage block is made of steel, has a nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide material, and have a square or rectangular base. Each block h...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611673-551

The Mitutoyo grade AS-2 rectangular gage block is made of steel, has a nominal length engraved in metric [millimeter (mm)], and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide mat...

Manufacturer: HHIP Brand: HHIP Model: 3402-1205

5" Sine Bar | For angles set up by using Sine Bar with 1-2-3 Blocks or Gage Block. | Parallelism: 0.0004". | Working face accuracy 0.00003"/ per inch. | Rolls center distance accuracy 0.0002". | Flange on the end for the resting of workpiece.

Manufacturer: TTC Brand: TTC

Includes: (2) "V" blocks and (2) clamps.

Manufacturer: Anytime Tools Brand: Anytime Tools

Professional Precision Tool An adjustable parallel set is a valuable addition to any toolbox. They are ideal for work on grinding machines, shapers, drill presses, milling machines and many other applications. Take advantage of the versatility of these parallels in gaging, inspection, layout and setups on various professional machine tools for daily use. Exact size can be set with micrometer or expand into slot and measure. Simple adjustment is achieved with the strong locking screws. Parallels are adjustable to the following sizes: 3/8" - 1/2", 1/2" - 11/16", 11/16" - 15/16", 15/16" - 1-5/16", 1-5/16" - 1-3/4", 1-3/4" - 2-1/4". The parallels are 5" long and 1/4" thick. Parallels consist of two sliding pieces that are accurately dovetailed. Features: Six piece adjustable parallel set ranging from 3/8 to 2 1/4 inchesParallels consist of two accurately dovetailed sliding piecesMade of precision ground tool steel with crisp edges and decent finish Easily expanded to size in openings for quick reference measurements Sturdy locking screws allow simple adjustmentParallels consist of two Accurately dovetailed sliding piecesConvenient fitted plastic case with size range markings for reference Dimensions: 3/8~1/2", 1/2~11/16", 11/16~15/16", 15/16~1-5/16", 1-5/16~1-3/4", 1-3/4~2-1/4"