Dimensional Calibration - Page 21

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-267

Manufacturer: Bahco Brand: Bahco Model: 315Z-1.1/2

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-283

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2200-0904

Thickness: 1-1/4'' Number of holes: 13 Tapped 1/4''-2 the material of the precision angle plate 20CrMnTi ( C:0.17-0.23; Si: 0.17-0.37; Mn:0.8-1.1; Cr: 1.00-1.30; Ti: 0.04-0.10)

Manufacturer: Fowler Brand: Fowler

3/8 - 2-1/4 Adjustable Parallels Set Includes: Fitted case Sizes: 3/8 - 1/2 1/2 - 11/16 11/16 - 15/16 15/16 - 1-5/16 1-5/16 - 1-3/4 1-3/4 - 2-1/4 Features: Each parallel has two dovetailed pieces that slide on each other and lock in position with set screws. Easily adjusted and set up to size with a micrometer. They can be quickly inserted in slots and expanded to size Height size ranges from 3/8 to 2-1/4 Slot size determined by measuring the parallels externally with a micrometer

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611113-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block. A square gage block can retain stable orientation both longitudinally and laterally. A wide range of application measurements can be made, including cutting tool positioning, angle measurement with a sine bar, taper measurement with a roller, and inspection of depth micrometers.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611113-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block. A square gage block can retain stable orientation both longitudinally and laterally. A wide range of application measurements can be made, including cutting tool positioning, angle measurement with a sine bar, taper measurement with a roller, and inspection of depth micrometers.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Note: 1) Maximum permissible cylindricity error: making no allowance for a rim of 1 mm. 2) Uncertainty of measurement Accuracy: The value is determined through a 2-point measurement taken at half - height of the setting ring. The measuring direction is marked with 2 strokes.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611561-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.

Manufacturer: Gasco Brand: Gasco

Calibration Gas, Gas Name Hydrogen Sulfide, Nitrogen, Gas Mixture 60 ppm Hydrogen Sulfide, N2, Background Gas Nitrogen, Cylinder Cylinder 66L, Cylinder Material Aluminum Alloy, For Use With Any and All OEM Gas Detectors, Connection Size C-10, Max. Pressure 1200 psi, Cylinder Dia. 2-9/10 In., Cylinder Height 10-1/2 In., Accuracy +/-5 Percent, Calibration Certificate NIST Technical Specification Item Calibration Gas Gas Name Hydrogen Sulfide, Nitrogen Gas Mixture 60 ppm Hydrogen Sulfide, N2 Background Gas Nitrogen Cylinder Cylinder 66L Cylinder Material Aluminum Alloy For Use With Any and All OEM Gas Detectors Connection Size C-10 Max. Pressure 1200 psi Cylinder Dia. 2-9/10 Cylinder Height 10-1/2 Accuracy +/-5% Calibration Certificate NIST