|
|
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $32.00 1% OFF
Manufacturer: ezMachineTools
Brand: ezMachineTools
Manufacturer: ezMachineTools
Brand: ezMachineTools
This Cast Iron V Block Pair is size 4 inchx2-1/4 inchx2-5/8 inchx1-5/8 inch. It is made with high quality casting and is properly seasoned against distortion. It is machined square and parallel to meet standard specs.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $33.29 1% OFF
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $33.60 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611612-551
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611612-551
|
The Mitutoyo grade AS-2 rectangular gage block is made of steel, has a nominal length engraved in metric [millimeter (mm)], and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide mat...
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $34.88 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611211-551
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611211-551
|
The Mitutoyo grade AS-2 rectangular gage block is made of steel, has a nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide material, and have a square or rectangular base. Each block ha...
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $34.88 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611195-551
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611195-551
|
The Mitutoyo grade AS-2 rectangular gage block is made of steel, has a nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide material, and have a square or rectangular base. Each block ha...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $40.08 32% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 3402-1205
Manufacturer: HHIP
Brand: HHIP
Model: 3402-1205
5" Sine Bar | For angles set up by using Sine Bar with 1-2-3 Blocks or Gage Block. | Parallelism: 0.0004". | Working face accuracy 0.00003"/ per inch. | Rolls center distance accuracy 0.0002". | Flange on the end for the resting of workpiece.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $41.59 1% OFF
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
Includes: (2) "V" blocks and (2) clamps.
-
5.0 of 5.0 with 5 Reviews
SALE PRICE: $42.49 1% OFF
Manufacturer: Grizzly
Brand: Grizzly
Model: G9650
Manufacturer: Grizzly
Brand: Grizzly
Model: G9650
These tool room grade "B" Granite Plates have a bilateral accuracy of plus or minus .0001" total instrument runout for precision measurements form a common surface base. Granite Plates are harder than steel, non magnetic, least responsive to temperature changes, practically maintenance free and won't corrode like steel. Available with clamping ledges or without.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $43.65
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Designed for calibrating micrometers and zeroing vernier, dial, and digital calipers. 1/4" diameter rod with flat end.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $43.65
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Designed for calibrating micrometers and zeroing vernier, dial, and digital calipers. 1/4" diameter rod with flat end.
|
|