|
|
-
4.4 of 5.0 with 33 Reviews
SALE PRICE: $42.31 1% OFF
Manufacturer: Starrett
Brand: Starrett
Manufacturer: Starrett
Brand: Starrett
End Measuring Rod, Dia. 1/4 In., Range 5 In., For Use With 6 In. Micrometers, Includes Insulating Rubber Handle End Measuring RodsUse for checking and setting micrometers of 2" capacity and larger. Also use on machine tools for comparing gages, checking precision measuring tools, and measuring parallel surfaces. Insulated handles minimize expansion by heat when held in the hand.
-
4.4 of 5.0 with 39 Reviews
SALE PRICE: $42.99 1% OFF
Manufacturer: Generic
Brand: Generic
Manufacturer: Generic
Brand: Generic
Height Specifications Relate to Consistency Within Each Pair
-
4.4 of 5.0 with 16 Reviews
SALE PRICE: $43.20 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611635-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611635-531
|
The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in ...
-
4.4 of 5.0 with 13 Reviews
SALE PRICE: $48.29
Manufacturer: Heinrich
Brand: Heinrich
Manufacturer: Heinrich
Brand: Heinrich
Applications Holding pressure is adjustable from 400 to 1,600 lbs. Features Hardened and ground bars and locking mechanism. Hollow base for clear through drilling. Lever cams jaw ahead 3/32".
-
4.4 of 5.0 with 6 Reviews
SALE PRICE: $53.78 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616115-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616115-531
|
The Mitutoyo grade 0 square gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a certificate of inspection, meets ASME B89.1.9.2002 standards, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to cal...
-
4.4 of 5.0 with 47 Reviews
SALE PRICE: $54.40 1% OFF
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: EG10-9012
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: EG10-9012
-
4.4 of 5.0 with 5 Reviews
SALE PRICE: $57.62 3% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613214-551
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613214-551
|
The Mitutoyo grade AS-2 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide mater...
-
4.4 of 5.0 with 3 Reviews
SALE PRICE: $60.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Short Shank Inspection Balls. Premium Quality. Excellent for inspection Applications Such As Coordinate Measuring Machines One-piece construction. High Finish Concentricity of Ball to shank - .0001" T.I.R. Model No. 10608, Short Shank inspection
-
4.4 of 5.0 with 49 Reviews
SALE PRICE: $60.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Short Shank Inspection Balls. Premium Quality. Excellent for inspection Applications Such As Coordinate Measuring Machines One-piece construction. High Finish Concentricity of Ball to shank - .0001" T.I.R. Model No. 10606, Short Shank inspection
-
4.4 of 5.0 with 48 Reviews
SALE PRICE: $61.31 1% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: Pro Series by HHIP
Model: 4102-0015
Manufacturer: ABS Import Tools, Inc.
Brand: Pro Series by HHIP
Model: 4102-0015
CHHIP Pro-series plug gage handles features SPI style. Superior finish and smooth operation. Holds pin gage with greatest gripping power. Can be used with go pin (green) and no go pin (red). comfortable and ergonomically designed handle for pin gages. No bushings required. Minimum measuring range is 0.626". maximum measuring range is 0.75".
|
|