|
|
-
4.5 of 5.0 with 32 Reviews
SALE PRICE: $134.99 1% OFF
Manufacturer: PHASE II
Brand: PHASE II
Manufacturer: PHASE II
Brand: PHASE II
Applications Portable hardness test for metals.
-
4.5 of 5.0 with 25 Reviews
SALE PRICE: $136.31 4% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613678-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613678-521
|
The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calib...
-
4.5 of 5.0 with 19 Reviews
SALE PRICE: $139.53 55% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Inspection report with actual measured length; declaration of conformity; identification number
-
4.5 of 5.0 with 39 Reviews
SALE PRICE: $139.99 1% OFF
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
-
4.5 of 5.0 with 18 Reviews
SALE PRICE: $142.88 54% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Inspection report with actual measured length; declaration of conformity; identification number
-
4.5 of 5.0 with 46 Reviews
SALE PRICE: $146.69 1% OFF
Manufacturer: Fluke Calibration
Brand: Fluke
Model: 3102-4
Manufacturer: Fluke Calibration
Brand: Fluke
Model: 3102-4
Insert, 1/4 in (6.4 mm) : 9102S.
-
4.5 of 5.0 with 46 Reviews
SALE PRICE: $147.50 1% OFF
Manufacturer: HHIP
Brand: HHIP
Manufacturer: HHIP
Brand: HHIP
24 X 18 X 3" Granite Surface Plate Grade B Ledge 0 ~ Surface plates are checked by an auto-collimator for overall accuracy assurance. ~ Accuracy is ±0001". ~ Granite surface plates meet or exceed Federal Specifications GGG-P-463C. ~ Includes a certificate of inspection. ~ Note that these are not NIST traceable.
-
4.5 of 5.0 with 10 Reviews
SALE PRICE: $148.83 28% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611627-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611627-516
|
The Mitutoyo grade K rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.This grade K gage block is commonly used for reference applications in temperature-controlled academic research facilities, such as a calibration laboratories or inspection rooms, to verify the accuracy of gage blocks used in calibration. It is manufactured by absolute measurement using an interferometer to minimize surface irregularities. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior.This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate ...
-
4.5 of 5.0 with 5 Reviews
SALE PRICE: $157.83 8% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611646-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611646-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.
-
4.5 of 5.0 with 1 Reviews
SALE PRICE: $162.83
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 177-290
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 177-290
SETTING RING, 40MM
|
|