|
|
-
4.4 of 5.0 with 15 Reviews
SALE PRICE: $26.30 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0916
Manufacturer: HHIP
Brand: HHIP
Model: 4101-0916
.105" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".
-
4.4 of 5.0 with 38 Reviews
SALE PRICE: $27.29
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
-
4.4 of 5.0 with 43 Reviews
SALE PRICE: $27.31 1% OFF
Manufacturer: Vestal Mfg Co
Brand: Marshall
Manufacturer: Vestal Mfg Co
Brand: Marshall
Unique forming process develops high cross-sectional strength. Ample load-bearing capacity. Stiff in service. Free from sagging or buckling. All lintels should be shored until mortar has cured. Coated with black corrosion-resistant paint. 7" width. For 8" block. Made in USA.
-
4.4 of 5.0 with 5 Reviews
SALE PRICE: $29.95 58% OFF
Manufacturer: Anytime Tools
Brand: Anytime Tools
Manufacturer: Anytime Tools
Brand: Anytime Tools
Professional Grade Precision Tool Angle blocks are a valuable tool for the alignment and measurement of precise angles. They can also be stacked to create other angles. Precision-ground, steel construction. Features: Set contains two angle blocks, one 30°-60°-90° degree block and one 45°-45°-90° degree blockAccuracy +/-20 seconds, 0.0001" per inch. Hardened steel Rockwell HRC 55 3" long x 1/4" thick Includes padded fitted case
-
4.4 of 5.0 with 44 Reviews
SALE PRICE: $30.00 1% OFF
Manufacturer: ezMachineTools
Brand: ezMachineTools
Manufacturer: ezMachineTools
Brand: ezMachineTools
This cast iron V block has size of 3"x1-3/4"x2-3/8"x1-5/16". Made out of high quality casting, properly seasoned against distortion, machined square and parallel to meet standard specs.
-
4.4 of 5.0 with 35 Reviews
SALE PRICE: $30.45 1% OFF
Manufacturer: LK Industries
Brand: L-K Industries
Model: S10D-RACK
Manufacturer: LK Industries
Brand: L-K Industries
Model: S10D-RACK
Racks D
-
4.4 of 5.0 with 26 Reviews
SALE PRICE: $30.50
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Inch Gage Indicator Ball with 4-48 stems for Flexbar Precision Indicator Gage Ball SystemTM (Size: 1.1250); Precision Grade Gage Balls with affixed threaded stems for use with dial gages and calipers. Easy to use and enables you to measure critical internal taper angles, taper openings, chamfers, groove locations and hole depths both quickly and accurately. Precision Indicator Gage Ball System eliminates complicated and costly setups with sine plates (gage block), optical comparators, flush pin gages, plug gages, chamfer, micrometers and similar checking devices for any related taper bore dimensions. System includes: a set of thirty-one balls chrome steel hardened to 63RC, ground and lapped, and certified to grade 25 Accuracy °.0001 inch diameter, sphericity .000025 inch, sizes ranging from .0938 to 1.2500 with affixed 4-48 threaded indicator stems.
-
4.4 of 5.0 with 504 Reviews
SALE PRICE: $31.64 10% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLK-CNX C3002
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLK-CNX C3002
The CNX C3002 Modular DMM 2-Compartment Soft Case is as versatile as the CNX wireless test tool team. This carrying case can work alone, holding the CNX Wireless Multimeter and test leads, or can be attached to the CNX C3000 Premium Modular Tool Bag. Your CNX tools are always within easy reach, ready for testing.
-
4.4 of 5.0 with 9 Reviews
SALE PRICE: $36.69 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611343-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611343-541
|
The Mitutoyo grade AS-1 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in...
-
4.4 of 5.0 with 23 Reviews
SALE PRICE: $40.55 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613166-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613166-541
|
The Mitutoyo grade AS-1 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment...
|
|