Calibration - Page 141

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-298

Manufacturer: Fluke Corporation Brand: Fluke Model: 715

The Fluke 715 Volt/mA Calibrator delivers outstanding performance, durability and reliability. The calibrator is compact, lightweight, and easy to carry. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015-Percent and 1 mA resolution. Measure voltage output process signals from PLC’s transmitters. The 715 is designed to source or simulate a 24 mA loop current and source voltage to 100 mV or 10V. Features 24V loop supply with simultaneous current measurement, improved battery life, 250 ohm HART resistor with loop power, step and linear ramp output function and configurable zero and span settings. The calibrator’s enhanced voltage and current measure and source accuracy creates a highly functional tool. The 715 is compatible with the TPAK ToolPak magnetic hanging system (sold separately). Includes a protective yellow holster with test lead storage, instructions sheet (14 languages), single 9V alkaline battery, test leads and alligator clips, and NIST- traceable calibration report and data. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Calibration Brand: Fluke Model: 1523-156

You need accuracy for compliance, product yields, energy savings, and consistent results. The 1523/24 uses current reversal, a technique used in high-end instruments that eliminates thermal EMFs, for precision temperature measurements. Specifications are guaranteed from -10 ºC to 60 ºC ambient. Special precision resistors and a highly stable reference voltage source keep 1523/24 accuracy virtually insensitive to environmental temperature. Like all Fluke handheld tools, the 1523/24 Reference Thermometers endure rigorous testing in temperature extremes and under harsh conditions of vibration, so you can take them anywhere you need to go. An optional magnetic hanger allows you to hang the thermometer for easy viewing while freeing your hands to focus on the job.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2452080

Fluke 726 precision multifunction process calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis. Measure or source pressure using any of 29 Fluke 700Pxx pressure modules. Source mA with simultaneous pressure measurement to conduct valve and I/P tests. Integrated pressure switch test allows you to capture the set, reset and dead band of a switch. Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis. Transmitter error percent calculation, interpret calibration results without a calculator. Perform fast linearity tests with auto step and auto ramp features. Power transmitters during test using 24 V loop supply and simultaneous mA measurement. Store frequently-used test setups for later use. Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing. HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation. Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement. New voltage input protection design for improved reliability. 3000 m operating altitude. EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 approved. Runs on 4 AA alkaline batteries. Current DC: 24 mA 0.01 percent + 2 mA. Resistance: 0.0 to 4000 O +/- 0.015 percent. Storage temperature: -20 degrees C to +71 degrees C. 726 including: 1 set of AC72 alligator clips, 1 set of stackable test leads, 1 set of TL 75 test leads, user manuals and NIST- traceable calibration report and data.

Manufacturer: Starrett Brand: Starrett Model: 81653

Our straight edges are produced from pink granite, as are all of our accessories. Straight edges have a single long, narrow face finished flat. Lifting holes are provided on sizes 48" or larger.

Manufacturer: Fluke Calibration Brand: Fluke Model: 9143-DW-156

Whether you need to calibrate 4-20 mA transmitters or a simple thermostatic switch, a Field Metrology Well is the right tool for the job. With three models covering the range of –25 °C to 660 °C, this family of Metrology Wells calibrates a wide range of sensor types. The optional process version (models 914X-X-P) provides a built-in two-channel thermometer readout that measures PRTs, RTDs, thermocouples, and 4-20 mA transmitters which includes the 24 V loop supply to power the transmitter. Each process version accepts an ITS-90 reference PRT. The built-in readout accuracy ranges from ± 0.01 °C to ± 0.07 °C depending on the measured temperature. Reference PRTs for Field Metrology Wells contain individual calibration constants that reside in a memory chip located inside the sensor housing, so sensors may be used interchangeably. The second channel is user-selectable for 2-, 3-, or 4-wire RTDs, thermocouples, or 4-20 mA transmitters. For comparison calibration, don’t hassle with carrying multiple instruments to the field. Field Metrology Wells do it all as a single instrument. Traditionally, calibrations of temperature transmitters have been performed on the measurement electronics, while the sensor remained uncalibrated. Studies have shown, however, that typically 75 % of the error in the transmitter system (transmitter electronics and temperature sensor) is in the sensing element. Thus, it becomes important to calibrate the whole loop—both electronics and sensor. The process option of Field Metrology Wells makes transmitter loop calibrations easy. The transmitter sensor is placed in the well with the reference PRT and the transmitter electronics are connected to the front panel of the instrument. With 24 V loop power, you are able to power and measure the transmitter current while sourcing and measuring temperature in the Field Metrology Well. This allows for the measurement of as-found and as-left data in one self-contained calibration tool. All Field Metrology Wells allow f...

Manufacturer: Starrett Brand: Starrett Model: 80883

Even distribution of large quartz crystals provides a smooth finish, which significantly reduces wear on the surface plate and the instruments used on it. Fine micro-finish, combined with the natural voids in the surface, prevents wringing and provides a velvety-smooth tool action. Non-quartz-bearing granite in average daily use requires resurfacing about once a year, while crystal pink plates used in these same plants have required resurfacing only once every three to five years, on average. Great surface hardness and wear resistance the highest percentage of quartz crystals of any granite plate. Quality and economy combined. Comparable to black granite plates while outwearing them as much as 5 to 1. Standard-size plates are mounted on resilient support pads, providing isolation from normal vibration and a non-distorting 3-point suspension. Packed one per crate with skids for forklift handling.

Manufacturer: Flexbar Brand: Flexbar

Individual Precision Grade Gage Ball Size: 14mm. Chrome Steel Hardened To 63RC, Ground and Lapped Certified to Grade 25 Accuracy°.0001" dia.,000025" sphericity* Inch and metric sizes available.

Manufacturer: Distinct Brand: Distinct

Feature:100% Brand New.Material: Plastic + Metal.Multi-unit Display (g/kg/oz/lb).Pocket Size: 120 * 65 * 20mm / 4.8 * 2.5 * 0.8 inch.Powered by : 2 * 1.5V AAA batteries (Battery not included).Capacity: 0.1-500g.Suitable for precise weighing.Package Included:1 x Digital Pocket ScaleWhy Choose Us?1.Strongest Warranty & Money-Back Guarantee - Yes, you have peace of mind before you purchase and after you purchase. You're double-backed by the best warranty & guarantee.2.Ultimate Selection & Options - We offer a full product range of products so you can meet all your customers' needs.3.Industry-Leading, Quality - We carry only the finest products from the finest manufacturers in the industry. You can expect long-lasting performance from each and every one of our products.4.Outstanding Service - As a customer, you're part of our family. You can expect friendly, courteous, responsive service before and after the sale.

Manufacturer: Winters Brand: Winters Instruments Model: SNV510LF

Applications: Provides precision flow control for any non-corrosive application up to 400 psi (2,758 kPa). For mild applications, this valve can be used to throttle pulsation. CRN Registered. Warranty: 1 Year. Body: Forged Lead Free Brass. Handle: ABS plastic, dyed red. O-Ring: Rubber. Shaft: Lead Free Brass. Nut: Lead Free Brass. Process Temperature: -9°F to 212°F (-23°C to 100°C). Maximum Operating Pressure: 400 PSI (2758 KPA). Connection: 1/4" NPT Female x Female.