Calibration - Page 143

Manufacturer: General Tools Brand: General Tools Mfg Co In Model: 833

833 Model Code: AA - Price is for 1 Each (part# 833) This item features: -3'' deep fingers will measure profiles up to 1 1/4''. -Extra length is ideal for woodworking, linoleum and ceramic tile installation or any job where contour duplication is essential. -Components parts are enamel plated and brass plated. -Ideal for woodworking, linoleum installation or any job where contour duplication is essential. -Stainless steel pins. -Graduation(s): Inch/mm. Model Code  Model Description AALength:10 in, Width:3 in, Material:Plastic ABLength:6 in, Width:3 1/2 in, Material:Stainless Steel, Finish:Brass Plated, Type:Wire Contour Gauge

Manufacturer: Flexbar Brand: Flexbar

Inch Gage Indicator Ball with 4-48 stems for Flexbar Precision Indicator Gage Ball SystemTM (Size: .3125); Precision Grade Gage Balls with affixed threaded stems for use with dial gages and calipers. Easy to use and enables you to measure critical internal taper angles, taper openings, chamfers, groove locations and hole depths both quickly and accurately. Precision Indicator Gage Ball System eliminates complicated and costly setups with sine plates (gage block), optical comparators, flush pin gages, plug gages, chamfer, micrometers and similar checking devices for any related taper bore dimensions. System includes: a set of thirty-one balls chrome steel hardened to 63RC, ground and lapped, and certified to grade 25 Accuracy °.0001 inch diameter, sphericity .000025 inch, sizes ranging from .0938 to 1.2500 with affixed 4-48 threaded indicator stems.

Manufacturer: American Educational Products (Wisconsin) Brand: American Educational Products

Aluminum and brass balls are used in collision and pendulum activities, as well as other force, motion, and mass demonstrations.

Manufacturer: United Scientific Supplies Brand: United Scientific Supplies Model: WHST13

Slotted weight set with hanger & case, brass. Includes 1x50g, 9x20g, 1x10g, 2x5g, hanger.

Manufacturer: TTC Brand: TTC

Use for set-up and layout on drill presses and milling machines.

Manufacturer: TTC Brand: TTC

Use for set-up and layout on drill presses and milling machines.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0777

HHIP individual rectangular gage block is supplied with a Manufacturer's certificate. Grade as-0 (2). offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1 and ISO guide 25 certified. Tolerance is +0.000004/-0.0000002". size is 0.750".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611115-531

The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made o...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611125-531

The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made o...

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EG02-0408

Finished from 6-16 micro inches •Nominal Tapping: 0.0001" to 0.0003" •5 holes tapped to 3/8-16 and others untapped •Precision ground on all sides •Squareness on all sides •Surface finish •Oversize to allow nominal tapping Sets includes: •5 stainless steel socket head cap screws •1 hex key •Packed in Fitted Strong Case