Calibration - Page 15

Manufacturer: Fluke Corporation Brand: Fluke Model: TI-CAR CHARGER

For the ultimate flexibility in the field - recharge your thermal imager wherever and whenever you need to. For use with: Ti32, Ti25, Ti10, TiR32, TiR1, TiR

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-700TLK

Process test lead kit for 753/754 multi-function process calibrator

Manufacturer: Grundens Brand: Grundens Color: Green

Grundens Gage Nightwatch Puffy Jacket is ideal for layering under foul weather gear on cold, blustery days or wearing as a standalone jacket to ward off a chilly spring wind or the chill of a nightwatch at sea. Its unique quilted insulation maximizes retention of body heat while reducing bulk, allowing for full freedom of movement whether working on deck, battling a big winter bluefin or climbing a vertical rock face. Worn inside or out, the wind-cutting Nightwatch Puffy is the perfect way to make every job or outdoor activity more comfortable and enjoyable.Features: • Quilted lightweight jacket• Friendly 20D nylon shell and lining with DWR finish• GAGE 60 gram poly fill insulation with hydrophobic silicon treatment• Zippered hand warmer pockets.• Jacket stuffs into its own left chest pocket for stowage • Dual adjusting drawcord hem• Available in Black and Green; Sizes S-3XL (an additional cost is applied to size 3XL)

Manufacturer: Grundens Brand: Grundens Color: Black

Grundens Gage Nightwatch Puffy Jacket is ideal for layering under foul weather gear on cold, blustery days or wearing as a standalone jacket to ward off a chilly spring wind or the chill of a nightwatch at sea. Its unique quilted insulation maximizes retention of body heat while reducing bulk, allowing for full freedom of movement whether working on deck, battling a big winter bluefin or climbing a vertical rock face. Worn inside or out, the wind-cutting Nightwatch Puffy is the perfect way to make every job or outdoor activity more comfortable and enjoyable.Features: • Quilted lightweight jacket• Friendly 20D nylon shell and lining with DWR finish• GAGE 60 gram poly fill insulation with hydrophobic silicon treatment• Zippered hand warmer pockets.• Jacket stuffs into its own left chest pocket for stowage • Dual adjusting drawcord hem• Available in Black and Green; Sizes S-3XL (an additional cost is applied to size 3XL)

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613112-521

The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic, which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the m...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613659-521

The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calib...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613659-521

The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calib...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-180

Mitutoyo Setting Ring, Size: .500" ID, Thickness: .390", Accuracy: ± .00004"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613197-521

The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic, which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the m...

Manufacturer: Grundens Brand: Grundens Color: Black

Grundens Gage Nightwatch Puffy Jacket is ideal for layering under foul weather gear on cold, blustery days or wearing as a standalone jacket to ward off a chilly spring wind or the chill of a nightwatch at sea. Its unique quilted insulation maximizes retention of body heat while reducing bulk, allowing for full freedom of movement whether working on deck, battling a big winter bluefin or climbing a vertical rock face. Worn inside or out, the wind-cutting Nightwatch Puffy is the perfect way to make every job or outdoor activity more comfortable and enjoyable.Features: • Quilted lightweight jacket• Friendly 20D nylon shell and lining with DWR finish• GAGE 60 gram poly fill insulation with hydrophobic silicon treatment• Zippered hand warmer pockets.• Jacket stuffs into its own left chest pocket for stowage • Dual adjusting drawcord hem• Available in Black and Green; Sizes S-3XL (an additional cost is applied to size 3XL)