Calibration - Page 150

Manufacturer: Fluke Brand: Fluke Model: 4343746

Ground/Earth Cable Reel 25 m (81.25 ft). Compatible with Fluke 1623-2 GEO Earth Ground Tester, Fluke 1623-2 GEO Earth Ground Tester Kit, Fluke 1625-2 GEO Earth Ground Tester, Fluke 1625-2 GEO Earth Ground Tester Kit.

Manufacturer: Mettler Toledo Brand: Mettler Toledo

A customized 3rd weight for your Mettler Toledo CarePacs. Use the OIML Class E2 50 gram weight to perform customized testing such as minimum weight determination. The 3rd weight perfectly fits into your CarePac carrying case.

Manufacturer: Flexbar Brand: Flexbar

Flexbar Interchangeable Ball Contacts 5.5/12 for Flexbar Digi-Bascom Universal Measuring Tool. A: 5.5, B: 12

Manufacturer: Flexbar Brand: Flexbar

Precision Spherical Ball Set. Range: 1/32" to 1/2". Excellent for Checking Micrometers and other related inspection equipment. Checking hole tapers. Checking radius. Good for Ball burnishing. GR .25 & .000025 sphericity. Chrome steel Balls. 16 Sizes: 1/32, 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2 3 each of Sizes 1/32" through 3/8", and 2 each of 13/32" through 1/2".

Manufacturer: Grundens Brand: Grundens Color: Black

Grundens Weather Gage Jacket WJ200 Non Hooded- Softshell is a unique fabric that offers the protection and abrasion resistance of a shell, with the soft and easy wearing of a fleece. These fabric features are combined with a water repellent and breathable membrane to provide a jacket suitable for all but the most extreme weather conditions. The Weather Gage jacket has water repellent zippers and a nice high collar. The cinch cord hem controls also lead into the hand warmer pockets. There is a large napoleon pocket on the outside with a water repellent zipper and a large inner chest pocket that is MP3 friendly with a exit for a headphone jack. The wrists have a velcro tab for cinching tight. Sizes and colors available as displayed.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611825-531

The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in ...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Designed for calibrating micrometers and zeroing vernier, dial, and digital calipers. 3/8" tubular with 1/4" diameter flat ends. Standard have two insulating grips to protect rods from heat of hands. Meets federal specifications.

Manufacturer: Troemner Brand: Troemner Model: 9074

10 lb Class F cast iron grip handle weight.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 615611-531

The Mitutoyo grade 0 square wear gage block is made of tungsten carbide, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of tungsten carbide, which is harder than steel and ceramic for greater resistance to wear, and is more resistant to thermal expansion for accuracy. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior.This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface fi...

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0004

HHIP rectangular gage block set includes 10 blocks: 0.1000" thru 0.1009"Step of 0.0001", 9 blocks: 0.101"Thru 0.109"Step of 0.001", 9 blocks: 0.110" thru 0.190"Step of 0.010" and 8 blocks: 0.050, 0.200. 0.300, 0.400, 0.500, 1.0, 2.0 and 4.0". made of the highest quality tool steel. Surface hardness: HRC 64. Complete with Manufacturer's calibration or certificate. With fitted Wooden case with sizes labeled. Offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1, ISO guide 35 certified. Grade as 2= grade b: + 50 millionth.