Calibration - Page 159

Manufacturer: REED Instruments Brand: Reed Instruments Model: R2800 Color: Blue

This temperature simulator is capable of generating and converting an electrical signal to simulate temperatures for 8 different types of thermocouples and 7 RTDs. The R2800 features internal cold junction compensation, basic accuracy of 0.05% and a large easy-to-read LCD display.

Manufacturer: Fluke Brand: Fluke Model: 919811

Fluke PV350 Pressure and Vacuum Module is compatible with all fluke and most popular DMMs. It has digital pressure and vacuum measurements in a single module and a transducer sealed in 316 stainless steel which is compatible with variety of liquids as well as gases. This module measures vacuum to 76 cm and displays results in English.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Note: 1) Maximum permissible cylindricity error: making no allowance for a rim of 1 mm. 2) Uncertainty of measurement Accuracy: The value is determined through a 2-point measurement taken at half - height of the setting ring. The measuring direction is marked with 2 strokes.

Manufacturer: Fluke Calibration Brand: Fluke Model: 9172-INSZ

This inserts are ordered with 9172 Series Metrology Well Calibrators accommodating a variety of metric- and imperial-sized probe diameters.

Manufacturer: Martel Electronics Brand: Martel Electronics Model: 1919610

As with the original high accuracy BetaGauge P.I. PRO gauges, the BetaGauge PIR PRO takes the concept of a simple analog Test Gauge and combines it with the accuracy of digital technology. The new Reference Class gauges provide exceptional performance with ±0.04% of reading accuracy, especially when operated below 50% of their range. The BetaGauge PIR PRO builds on the proven performance of the BetaGauge PIR with a new purpose designed Zinc-Aluminum Alloy High Pressure Cast housing. The new housing improves the environmental integrity of the gauge in a lighter and smaller yet more rugged form factor

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-2

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 28.00" H2O Range.

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-10

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 2000" H2O Range.

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-7

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 138.0" H2O Range.

Manufacturer: Fluke Brand: Fluke Model: Fluke VT04A Color: Visual IR Thermometer with PyroBlen Plus

' Infrared Thermometer, Temp. Range (F) 14 Degrees to 482 Degrees F, Calibration Certificate No, Focus Spot Size and Distance 1 In. @ 43 In., Accuracy +/-2 Degrees C or +/-2.0 Percent, Emissivity Adjustable, Includes Portable Soft Case, Micro-SD Card, Micro-SD Conversion Adapter to Standard, (4) AA Batteries, Charger/Adapter Set, Printed Quick Start Guides, Laser Sighting Digital Camera, Battery Type (4) AA, Data Logging Yes, Alarm Yes, Display LCD, Temp. Range (C) -10 Degrees to 250 Degrees C '