Calibration - Page 19

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS212-G Color: Gray

Probe set includes 600V CAT III / 1000V CAT II rated 10:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 10x. Bandwidth: 200 MHz. Maximum input voltage 1000V CAT II or 600V CAT III. Maximum voltage to ground: 1000V CAT II or 600V CAT III per IEC / EN61010-031. Input resistance: 10 mega ohms. Input capacitance: 18 pF. Compensation range: 10 to 30 pF. Cable length: 2.5m. Color: grey. UL Listed.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS410-II-B

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Corporation Brand: Fluke Model: BC7217

External Battery Charger, For Graphical Multimeter

Manufacturer: Starrett Brand: Starrett Model: 568A

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-414D/62MAX+

FLUKE FLUKE-414D/62MAX+ FLUKE KIT WITH 414D LASER DISTANCE METER AND 62MAX+ IR THERMOMETER

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613857-521

The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calib...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-CNX-a3000

The CNX a3000 AC Wireless Current Clamp Module is part of the Fluke team of wireless troubleshooting tools.Connect the CNX a3000 AC Wireless Current Clamp Module to your test point and view the results up to 20 meters away on the CNX Wireless Multimeter. You’ll save time with fewer run-arounds collecting multiple measurements. Use multiple modules for measurements on three-phase systems, use as a stand-alone measurement tool, or combine with other CNX modules as a system for multiple measurements. From short distances you can even view readings from modules through closed electrical panels. Plus, using the optional PC adapter, there will be no more writing down data as the CNX remote modules capture up to 65,000 sets of time stamped min/max/avg readings. CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery with only the measurement module in harm’s way.Using the optional PC adapter, the CNX wireless troubleshooting system can track up to 10 measurement modules simultaneously, with results sent to a PC for further analysis.

Manufacturer: Starrett Brand: Starrett Model: 83030

The use of surface plate covers to protect precision granite investment. Prevent abrasive build up on plates with cover made from heavy gauge vinyl with a soft interior lining. Cover provide a tough, durable, protective outside with a soft cushion inside.

Manufacturer: Fluke Corporation Brand: Fluke Model: BP7235

Fluke NIMH rechargeable battery pack. Provides typical 16-hour battery life when used in 700 or 740 calibrator. 6 1.2V DC Ni-MH cells in custom-molded ABS/PC-blend case. Measures 7.1-inches length by 2.2-inches width by 0.9-inches height. 1 year warranty.

Manufacturer: Rice Lake Brand: Rice Lake

The Rice Lake U.S. customary (also referred to as English and avoirdupois), stainless steel, double-hooked test weight has a sliding hook that can be chained to other hooked weights or set flat, a density of 7.84, and is designed for use with hanging balances, and for applications including pressure, torque, and tensile strength testing. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets American Society for Testing and Materials (ASTM) E617, Class 6 specification for calibrating brass student weights.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.Rice Lake Weighing Systems manufactures weight-related and process-control equipment for use in research, scient...