|
|
-
4.1 of 5.0 with 21 Reviews
SALE PRICE: $142.54 75% OFF
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780327
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780327
|
The Ohaus metric, stainless steel calibration weight meets International Organization of Legal Metrology (OIML) Class F1 specifications and designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class F1 specifications for use calibrating high-precision top loading balances with a readability as low as 0.01g to 0.001g.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certi...
-
4.1 of 5.0 with 36 Reviews
SALE PRICE: $142.60
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619011
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619011
-
4.1 of 5.0 with 28 Reviews
SALE PRICE: $149.51 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 83023
Manufacturer: Starrett
Brand: Starrett
Model: 83023
The use of surface plate covers to protect precision granite investment. Prevent abrasive build up on plates with cover made from heavy gauge vinyl with a soft interior lining. Cover provide a tough, durable, protective outside with a soft cushion inside.
-
4.1 of 5.0 with 5 Reviews
SALE PRICE: $150.18 24% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-832-26
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-832-26
|
The Mitutoyo 516-series Grade 0 Ceramic Rectangular Metric Wear Gage Block Set includes a set of rectangular-shaped, white ceramic (CERA) wear gage blocks with nominal length engraved in millimeters on each, and is supplied with a Mitutoyo inspection certificate that states that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade 0 standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of each individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. Grade 0 gage blocks are commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. Ceramic blocks are harder than steel, and resist corrosion, abrasion, and burrs, withstand high temperatures without melting (high thermal expansion resistance), and provide dimensional stability. Rectangular-shaped blocks provide accurate wringing. The nominal length of each block is measured in millimeters, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on each block for traceability. The set comes with a fitted wooden case for storage.The set includes a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the blocks meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo...
-
4.1 of 5.0 with 48 Reviews
SALE PRICE: $150.52
Manufacturer: ohaus
Brand: Ohaus
Model: 30135292
Manufacturer: ohaus
Brand: Ohaus
Model: 30135292
With its best-in-class combination of features, versatility and performance The Ohaus Navigator series offers a wide range of use in industrial, food, education and laboratory weighing applications. Unique features, including touchless sensors, ultra-fast response time and superior overload protection put the Navigator into a class of its own.
-
4.1 of 5.0 with 28 Reviews
SALE PRICE: $151.50 8% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611520-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611520-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.
-
4.1 of 5.0 with 38 Reviews
SALE PRICE: $151.67
Manufacturer: Coilhose Pneumatics
Brand: Coilhose Pneumatics
Model: Tool Parts & Accessories
Manufacturer: Coilhose Pneumatics
Brand: Coilhose Pneumatics
Model: Tool Parts & Accessories
Coilhose Pneumatics 27FC4-DGHSX Combination Unit, 27 Series, 1/2"
-
4.1 of 5.0 with 46 Reviews
SALE PRICE: $154.99
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
Holes furnished throughout unit to facilitate clamping.
-
4.1 of 5.0 with 11 Reviews
SALE PRICE: $157.11 1% OFF
Manufacturer: Gasco
Brand: Gasco
Manufacturer: Gasco
Brand: Gasco
Technical Specification Item Calibration Gas Gas Name Sulfur Dioxide, Nitrogen Gas Mixture 50 PPM Sulfur Dioxide, Balance Nitrogen Background Gas Nitrogen Cylinder Capacity 66L Cylinder Material Aluminum Alloy For Use With Any and All OEM Gas Detectors Connection Size C-10 Max. Pressure 1200 psi Cylinder Dia. 2-9/10 Cylinder Height 10-1/2 Accuracy +/-5% Calibration Certificate NIST This listing is for each.
-
4.1 of 5.0 with 37 Reviews
SALE PRICE: $159.04 7% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611194-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611194-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.
|
|