Calibration - Page 194

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Manufacturer: Fluke Corporation Brand: Fluke Model: 3460439 Color: Yellow

Fluke C-range IR window, kwik twist. Increase the safety and speed of indoor and outdoor electrical thermography with these UL and CSA certified IR Windows. These IR Windows has 4-inches diameter. IR Windows provide increased: safety: perform IR scans without opening enclosures - virtually eliminating arc flash risk. Speed: scan a panel in 5 minutes, not 30 minutes. No panel cover removal/replacement. Frequency of inspection: Inspect more often, on your schedule - with instant access. Fluke IR Windows offer NFPA70E compliance without having to compromise on product performance. Clirvu Optic: gives your eyes and your camera a clear, unobstructed view. Auto Ground: effortless compliance with ir windows grounding requirements. Ease of installation: unlike others, fluke ir windows install quickly and easily - mounting to the front of the panel only designed and tested to the highest standards, fluke ir windows are suitable for use indoors and outdoors at virtually any voltage. With a kwik twist cover that magnetically sticks to the panel when removed, fluke ir windows are easy to use and deliver unmatched image clarity through a CLIRVU crystal. Exclusive to fluke ir windows, CLIRVU crystal technology is impervious to both moisture and vibration. Crystal insert diameter: 3.94-inches. Viewing aperture diameter: 3.5-inches. Viewing aperture area: 9.79 square inches. Thickness: 0.16-inches. CLIRVU coating: yes Shortwave IR capable: yes Midwave IR capable: yes. Longwave IR capable: yes. Ultraviolet (UV) capable: yes. Visual capable: yes. Fusion capable: yes. Maximum temperature: gaskets: 250 degrees C (482 degrees F), body: 659 degrees C (1219 degrees F), optic: 1400 degrees C (2552 degrees F). Gaskets: Low smoke and fume (LSF) compliant silic1. IP rating: IP65. NEMA rating: Type 3/12 (UL and CSA Third Party Certified). Vibration rating: IEC60068-2-6. Humidity rating: IEC60068-2-3. Pull-out strength: up to 630 kg (1388-pounds).

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Manufacturer: MITUTOYO Brand: Mitutoyo

MITUTOYO 177-187 2.000" SETTING RING

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540697

Fluke voltage test probe for 1760 3 phase power quality recorder. Range Rms: 10 V to 1000 V. Vnom: 600 V. Maximum continue: 1000 V. Fast transient range: Vp less than 1ms: 6000. Intrinsic error: greater than 0.1 percent. Operating voltage: 600 V CAT IV.

Manufacturer: Mitutoyo Brand: Mitutoyo

Mitutoyo 177-185 1.40000" Setting Ring For Bore, Hole Gages, Intrimiks, Micrometers

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Stepped groove construction. Made of case hardened steel in numbered pairs. Clamps within grooves permit use on sides. Set consists of two blocks and two clamps. Work capacity to approximately 2" (51 mm) diameter. Accuracy: V-grooves are central, parallel and square with all surfaces within 0.0003". V-groove is 90 degree +0.0000" -0.0003". Corresponding dimensions for each pair are alike within 0.0003". Clamping Range 2". US Made.

Manufacturer: Fluke Calibration Brand: Fluke Model: 9143-INSC

INSERT, C,9143, 0.25 (IN) HLS

Manufacturer: Fluke Corporation Brand: Fluke Model: BHT190

Set of break-out adapters for the three most common industrial bus connection systems M12, DB-9 and RJ-45. Each board works as a straight-through connection for the bus cable and gives access to the individual wires and pins of the connector system for hooking up probes. Break-out adapter DB-9, male-to-female. Gives access to pins 1 thru 9 and shield. Break-out adapter M12, with cables, male-to-female. Gives access to pins 1 thru 5. Break-out adapter RJ-45, female-to-female with patchcable (patchcable not shown on photo). Gives access to pins 1 thru 8 and shield. Maximum voltage: 30V rms, 42V peak, between any connection and between connections and ground.

Manufacturer: Practical Instrument Electronics, Inc. Brand: PIECAL Model: 520B

The Piecal 520B Thermocouple simulates a dedicated standard thermocouple curve over the entire industrial temperature range. It provides precise temperatures for inputs to all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. It is cold-junction compensated for changes in ambient temperature. This calibrator offers the highest performance and functions in its class by exceeding the accuracy and functions of many higher priced thermocouple calibrators.