Calibration - Page 199

Manufacturer: Fluke Corporation Brand: Fluke Model: C10 Color: Yellow

Snap-on yellow holster absorbs shocks and protects meter from rough handling. Includes built-in stand and hanger loop. One year warranty.

Manufacturer: Angle Tools Brand: Angle Tools

A simplified accurate, quick and direct method for angle set-ups in tooling, production and inspection. Ten Blocks. Furnished in 1 degree increments to 5 degrees and in 5 degree increments to 30 degrees. Oil-hardened steel, precision ground. Size 3" long x 1/4" thick. Accuracy .0001" per inch. Lightly magnetized for better holding. In fitted case.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611855-541

The Mitutoyo grade AS-1 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)], and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standa...

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 8902-0188

HHIP 80-88 HRSA Rockwell standard Test block can be used with 8902-0150 hardness Tester and most other imported hardness testers.

Manufacturer: Close Up Brand: Close Up

Politische Weltkarte Fototapete inklusive Kleister, in stabiler Rolle verpackt. Produktmerkmale Fototapete Politische Weltkarte: Maße: 232x158 cm Details: 24h Trockenzeit Anleitung:  Sicherstellen, dass der Untergrund sauber, trocken, flach und saugfähig ist.  Kleister nach Anweisung zubereiten: 40g auf einen Liter Wasser.  Gewünschte Position der Tapete genau an der Wand markieren.  Zuerst Teil A (der untere Teil) der Tapete  Eine dünne Schicht Kleister auf die Rückseite der Tapete auftragen.  Den Kleister maximal 2 Minuten einziehen lassen.  Die Tapete an der Wand anbringen  Mit einem sauberen Schwamm glattstreichen  Teil B wird genauso angebracht  Mögliche ungenaue Schnittkanten können mit einem scharfen Messer und einem Lineal entfernt werden Verpackung: in stabiler Papprolle Lieferumfang: Fototapete und Kleister < li>Empfohlene Werkzeuge: Lineal, scharfes Messer, Eimer für den Kleister, Kleisterbürste, Lot, Stift, Maßband You'll receive a pack of 20 tesa powerstrips additionally with this poster.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611592-541

The Mitutoyo grade AS-1 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)], and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standa...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611626-541

The Mitutoyo grade AS-1 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)], and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standa...

Manufacturer: Starrett Brand: Starrett Model: 234A-5

The rod or "standard" is for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gauges, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. It is made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. Available with insulated handle to minimize expansion by heat when held in the hand.

Manufacturer: TTC Brand: TTC

Manufacturer: Flexbar Brand: Flexbar

Precision V-Blocks and Clamps. All sides are ground Square and Parallel to each other. Matched Accuracy .0002" and numbered in pairs. Sturdy enough to be used in matching operation. Supplied With two Clamps.