|
|
-
4.0 of 5.0 with 4 Reviews
SALE PRICE: $75.30 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611875-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611875-541
|
The Mitutoyo grade AS-1 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)], and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standa...
-
4.0 of 5.0 with 30 Reviews
SALE PRICE: $76.00 1% OFF
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: EG02-0224
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: EG02-0224
Vee Block dimensions: 3'' long, 1-3/16'' wide, 1-3 x 16'' high Angle plate dimensions: 2-3/4'' long, 1-3/16'' wide 5/64'' high at narrow end Set Includes: V-Block 10°, 15°, 30° Angle Plate 1°, 2°, 3°, 4°, 5°
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $77.08 11% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 3402-0209
Manufacturer: HHIP
Brand: HHIP
Model: 3402-0209
Convenient clamping slots for mounting and are widely used for machining, layout and inspection. Made of high tensile cast iron properly seasoned against distortion. Open-End style, accurately machined square and parallel on all faces. Slot A is 90 degrees to slot C.
-
4.0 of 5.0 with 28 Reviews
SALE PRICE: $77.35 4% OFF
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0018
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0018
HRC 45 to 50 heat treatment. Angle Accuracy: ±5' Combination V-block and angle plate for rapid, easy setting. No sine vise, sine plate, angle vise, chart or gage block needed. Set Includes: V-Blocks: 10, 15, 30 degrees, Angle plates: 0.5, 1, 2, 3, 4, 5 degrees.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $79.92 3% OFF
Manufacturer: Tuthill
Brand: Fill-Rite
Model: KIT900GR
Manufacturer: Tuthill
Brand: Fill-Rite
Model: KIT900GR
Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USAâ€. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.
-
4.0 of 5.0 with 38 Reviews
SALE PRICE: $80.00
Manufacturer: BRECKNELL
Brand: Brecknell
Model: H8C-N5-1.0K-6YB
Manufacturer: BRECKNELL
Brand: Brecknell
Model: H8C-N5-1.0K-6YB
The HC8 load cells are alloy steel constructed, sealed by adhesive inside-oil proof, waterproof and anti-corrosion. A single shear beam, easy for installation, suitable for electronic platform scales, hopper scales and other electronic weighing devices.
-
4.0 of 5.0 with 30 Reviews
SALE PRICE: $80.70 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613193-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613193-531
|
The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement o...
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $81.66 20% OFF
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0019
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0019
Get quick setups for fringing various angles from 1/4 to 45 degrees Hardened steel With fitted case INCLUDES: 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, 30, 35, 40, & 45 degrees and 2 riser blocks.
-
4.0 of 5.0 with 6 Reviews
SALE PRICE: $82.00 1% OFF
Manufacturer: Mettler Toledo
Brand: Mettler Toledo
Model: 11123471
Manufacturer: Mettler Toledo
Brand: Mettler Toledo
Model: 11123471
Mettler Toledo ASTM class 1 sheet weights are analytical individual weights. Low magnetic permeability and high corrosion resistance ensure reliable values. These weights are manufactured under Mettler Toledo's stringent ISO9001 quality management system.
-
4.0 of 5.0 with 47 Reviews
SALE PRICE: $82.00 1% OFF
Manufacturer: Mettler Toledo
Brand: Mettler Toledo
Manufacturer: Mettler Toledo
Brand: Mettler Toledo
A customized 3rd weight for your Mettler Toledo CarePacs. Use the ASTM Class 1 50 gram weight to perform customized testing such as minimum weight determination. The 3rd weight perfectly fits into your CarePac carrying case.
|
|