|
|
-
4.0 of 5.0 with 11 Reviews
SALE PRICE: $89.63 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616126-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616126-521
|
The Mitutoyo grade 00 square gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and...
-
4.0 of 5.0 with 47 Reviews
SALE PRICE: $89.65 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614203-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614203-541
|
The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks ...
-
4.0 of 5.0 with 13 Reviews
SALE PRICE: $89.95
Manufacturer: United Scientific Supplies
Brand: United Scientific Supplies
Model: WHST12
Manufacturer: United Scientific Supplies
Brand: United Scientific Supplies
Model: WHST12
Deluxe slotted weight set with rack, 12 weights, brass/aluminum. Includes 1x500g, 2x200g, 1x100g, 1x50g, 20g, 1x10g, 1x5g, 2x2g, 1x1g, rack.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $89.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: GEO CABLE-REEL 50M
Manufacturer: Fluke Corporation
Brand: Fluke
Model: GEO CABLE-REEL 50M
The Fluke GEO reel with 50m/164 ft. of red wire cable is used to connect Fluke 1621, 1623, and 1625 testers to earth stakes for measuring earth ground resistance. The cable ends terminate with a banana plug and a connector to attach the earth ground tester to the Fluke earth stakes. The red cable reel has a hand crank on top of the reel for winding the cable back on the spool after use. The plug and the connector ends of the cable can be inserted into special slots on the reel to avoid unspooling of the wire. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
-
4.0 of 5.0 with 22 Reviews
SALE PRICE: $89.99 1% OFF
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
For angle set-ups in tooling, production and inspection. Includes (10) Precision angle blocks. Wooden case.
-
4.0 of 5.0 with 14 Reviews
SALE PRICE: $90.00
Manufacturer: BRECKNELL
Brand: Brecknell
Model: H8C-N5-2.5K-6YB
Manufacturer: BRECKNELL
Brand: Brecknell
Model: H8C-N5-2.5K-6YB
The HC8 load cells are alloy steel constructed, sealed by adhesive inside-oil proof, waterproof and anti-corrosion. A single shear beam, easy for installation, suitable for electronic platform scales, hopper scales and other electronic weighing devices.
-
4.0 of 5.0 with 37 Reviews
SALE PRICE: $91.08
Manufacturer: Ohaus
Brand: Ohaus
Model: 80850293
Manufacturer: Ohaus
Brand: Ohaus
Model: 80850293
|
The Ohaus metric, stainless steel coated aluminum, leaf-style, milligram precision calibration weight meets American Society for Testing and Materials (ASTM) Class 4 specifications, and is designed for use as a reference standard for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel coated aluminum for stability, resistance to corrosion, and low magnetic susceptibility. The leaf-style weight has a turned-up end for lifting with tweezers and reducing handling and the risk of contamination or damage. It is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets ASTM E617, Class 4 specification for use as a reference standard for calibrating semi-analytic balances, and for student use. An optional National Voluntary Laboratory Accreditation Program (NVLAP) certificate ensures precision and traceability.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Ac...
-
4.0 of 5.0 with 45 Reviews
SALE PRICE: $92.95 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611312-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611312-531
|
The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made o...
-
4.0 of 5.0 with 25 Reviews
SALE PRICE: $94.48
Manufacturer: Ohaus
Brand: Ohaus
Model: 80781110
Manufacturer: Ohaus
Brand: Ohaus
Model: 80781110
|
The Ohaus metric, stainless steel, leaf-style, milligram precision calibration weight meets American Society for Testing and Materials (ASTM) Class 1 specifications, and is designed for calibrating other weights, or electronic balances and scales. The leaf-style weight has a turned-up end for lifting with tweezers and reducing handling and the risk of contamination or damage. It is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets ASTM E617, Class 1 specification for use as a reference standard for calibrating other weights and high-precision balances with readabilities as low as 0.1mg to 0.01mg. An optional National Voluntary Laboratory Accreditation Program (NVLAP) certificate ensures precision and traceability.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Ac...
-
4.0 of 5.0 with 3 Reviews
SALE PRICE: $94.48
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780346
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780346
|
The Ohaus metric, stainless steel calibration weight meets International Organization of Legal Metrology (OIML) Class F1 specifications and designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class F1 specifications for use calibrating high-precision top loading balances with a readability as low as 0.01g to 0.001g.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certi...
|
|