|
|
-
4.0 of 5.0 with 10 Reviews
SALE PRICE: $103.99 7% OFF
Manufacturer: Tuthill
Brand: Fill-Rite
Model: KIT702VRUFP
Manufacturer: Tuthill
Brand: Fill-Rite
Model: KIT702VRUFP
Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USAâ€. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.
-
4.0 of 5.0 with 22 Reviews
SALE PRICE: $104.46 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616182-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616182-521
|
The Mitutoyo grade 00 square gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and...
-
4.0 of 5.0 with 38 Reviews
SALE PRICE: $104.68 3% OFF
Manufacturer: EISCO
Brand: EISCO
Manufacturer: EISCO
Brand: EISCO
A classic tool used in any lab or classroom. This 9 piece brass weight set with wooden block holder will last for decades of use due to its high integrity instruction and quality brass material.
-
4.0 of 5.0 with 22 Reviews
SALE PRICE: $105.00 1% OFF
Manufacturer: LK Industries
Brand: L-K Industries
Model: LK-TB206
Manufacturer: LK Industries
Brand: L-K Industries
Model: LK-TB206
Valve for LP Test cylinder
-
4.0 of 5.0 with 34 Reviews
SALE PRICE: $105.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611202-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611202-521
|
The Mitutoyo grade 00 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industri...
-
4.0 of 5.0 with 20 Reviews
SALE PRICE: $107.61
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Fowler Master Range .101-2.360 53-686-196
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $108.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619021
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619021
Inspects the scale of the height gage, etc., if used with the holder and holder base.
-
4.0 of 5.0 with 11 Reviews
SALE PRICE: $109.00
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Rockwell Certified Hardness Test Block. "C" Scale. Manufactured from the highest quality steel with a special heat treat and cold treat process which insures maximum consistency and repeatability. Accuracy exceeds ASTM E10, E18, E92 and E384 standards. HRC 55
-
4.0 of 5.0 with 42 Reviews
SALE PRICE: $109.90 9% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616197-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616197-531
|
The Mitutoyo grade 0 square gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a certificate of inspection, meets ASME B89.1.9.2002 standards, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to cal...
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $110.00
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Super Wee Blocks. Smallest Vee Blocks in the World Precision Hardened and ground, Wee Blocks are Within .0002" in both Squareness and Parallelism. Clamps are reversible. Blocks and Clamping Bars are Hardened. Complete in Fitted Case, Set includes: 1 each Super Wee Block "A" - Capacity .030" - 5/32" 1 each Bridge A (for above) 1 each Super Wee Block "B" - Capacity .050" - 9/32" 1 each Bridge B (for above) 1 each ring Clamp With thumb Screw for Block "A" 1 each ring Clamp With thumb Screw for Block "B" 2 each Top Clamping Bar - 1/8" 2 each Top Clamping Bar - 5/32" 1 each Top Clamping Bar - 3/16" Ideal for: Holding and indexing Pins and Punches while Grinding, drilling, Milling, EDM work (Electrodes, etc). inspecting parts on optical Comparators. Used in conjunction With Large V-Blocks or Magnetic V-Blocks. Provides maximum bearing surface. Model No. 16096, Super Wee Block Set
|
|