Calibration - Page 216

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-54-2 B 60HZ

The Fluke 50 Series II digital thermocouple thermometer is used for applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. This thermometer measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe. It comes with one or two Type K bead thermocouple probes with 40" cables that measure from -40 to +260 degrees C (-40 to +500 degrees F). It can store up to 500 points of data for analysis and monitoring, and it has an infrared communication port for exporting data to a computer for analysis. This thermometer provides the relative time of minimum, maximum, and average temperature measurements for monitoring. It has an offset function that allows the operator to compensate for thermocouple errors and increase accuracy. The thermometer body protects against splashing water and dust, and it comes in a holster that absorbs impact to help protect against damage if dropped. The thermometer enters sleep mode after 20 minutes of inactivity to help preserve battery life. It conforms to National Institute of Standards and Technology (NIST) standards for compliance with regulations. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives, and CSA mark indicates compliance with applicable Canadian Standards Association directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in industrial and manufacturing environments. Specifications Type K temperature range -200 to +1372 degrees C (-328 to +2501 degrees F) Type J temperature range -210 to +1200 degrees C (-346 to +2192 degrees F) Type T temperature range -250 to +400 degrees C (-418 to +752 degrees F) Type E temperature range -150 to +1000 degrees C (-238 to +1832 degrees F) Type N temperature range -200 to +1300 degrees C (-328 to +2372 degrees F) Type R and Type S temperature range 0 to 1767 degrees C (32 to 3212 de...

Manufacturer: Fluke Calibration Brand: Fluke Model: 9322

science-lab-thermometers

Manufacturer: Fluke Calibration Brand: Fluke Model: P5531-3.5M

Dirt/moisture traps provide an effective barrier against the transfer of moisture and dirt from an instrument under test to the sensitive piston/cylinder assembly of a pneumatic deadweight tester. Unexpected particle contamination or fluid inside the device under test will be prevented from entering the deadweight system, avoiding downtime for maintenance or repair. Designed for operation in the vertical position these traps are simple to dismantle and easy to clean. Designed to mount directly on the deadweight tester and featuring an acrylic chamber for visibility of contaminates this unit utilizes the standard test port adapters for easy instrument connections.

Manufacturer: Fluke Calibration Brand: Fluke Model: 2083

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Calibration Brand: Fluke Model: 1523-CASE

science-lab-thermometers

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-11

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 15.00 PSI Range.

Manufacturer: Fluke Brand: Fluke Model: 4629295

A fully functional current clamp meter that wirelessly relays measurements to other Fluke Connect enabled units.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-319

SETTING RING, 3 .5 IN

Manufacturer: Fluke Corporation Brand: Fluke Model: I3000S FLEX-24

The i3000s Flex is an ac current clamp utilizing the Rogowski principle. It can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas. Three ranges: 30A, 300A and 3000A, 1, 10 or 100 mV/A output. Ideal for current measurement on thick and hard to reach conductors without breaking the circuit. Maximum conductor diameter 178mm. CAT III 600V safety rating. Output sensitivity (AC-coupled): 100 mV, 10 mV, 1 mV per A. Load impedance: 100 kilo ohm minimum. Accuracy at +25 degree C: +/-1 percent of range (45 Hz to 65 Hz). Linearity 10 to 100 percent of range: +/-0.2 percent of reading. Noise: 8 mV AC rms (30 A), 2 mV AC rms (300A, 3000A). Frequency range: 10 Hz to 50 kHz (-3 dB). Phase error: less than +/-1 degree (45 Hz to 65 Hz), +/-10 degree (at 20 kHz). Position sensitivity with cable greater than 25 mm from the coupling: +/-2 percent of range. External field with cable greater than 200mm from the head: +/-1 percent of range. Power supply: 2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator or dedicated external power supply. Temperature Coefficient: +/-0.08 percent of reading per degree C. Working voltage: 600V AC rms or DC. Head circumference: 610mm. Head cable diameter: 14.3mm. Head bend radius: 38.1mm. Cable length (head to electronics): 2m. Output connection: 0.5m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter. Operating temperature range: -20 to +90 degree C (-4 to 190 degree F) (head), -20 to +85 degree C (-4 to 185 degree F) (electronics). Storage temperature range: -40 to +105 degree C (-40 to 221 degree F) (head), -20 to +85 degree C (-4 to 185 degree F) (electronics). Operating humidity: 15 to 85 percent (non-condensing).

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM201-DN200

Meriam's M201 has new features to make drop testing rotary (natural) gas meters even easier. New hardware options protect the M201 from one sided overpressure. Options include a 1/4 turn valve manifold and an integral push-to-read cartridge valve in addition to the traditional push-to-read valve manifold. More importantly, new operating features provide users with a live pressure display and more automation to make field use easier than ever before. The new Measure Mode lets the M201 be used as a conventional differential pressure measurement device. Users will appreciate the live pressure display as they check the handheld's zero or observe DP across rotary gas meters. And when a drop test is made, the M201 uses an internal stop watch to measure the test length. The user only has to start and stop the test; the M201 reports both the test time and the average differential pressure measured during the test. Toggle the Min/Max key to see the minimum and maximum DP measured during the test. User selectable shut-off. Programmable at 10, 20, 30, 45, 60 minutes and disable. User selectable shut-off. Programmable at 10, 20, 30, 45, 60 minutes and disable. 14 Ounce (6.9" by 3.8" by 2.3") polycarbonate, permanently dissipative, ESD protection. Sealed membrane type with 5 dome contact style buttons. 5 Significant digit LCD (0.25" high) 2 line x 16 alphanumeric characters with contrast adjustment. Backlight included. 4 Each AA batteries providing over 100 hours of continuous use. 1/8" Female NPT connection. NIST Traceable accuracy: + 0.05 percent FS 0-200" H2O.