|
|
-
3.9 of 5.0 with 28 Reviews
SALE PRICE: $166.40
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: 2591-0000
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: 2591-0000
Sine Plates 6'' x 6'' x 2'', Center Distance 5'' x 0.0002'', HRC 56-60, Ground, #2591-0000 Two precision ground rails are included Size: 6'' x 6'' x 2'' Center distance 5'' within 0.0002'' 0 - 60 Degree adjustable Hardened to HRC 56 - 60 and precision ground
-
3.9 of 5.0 with 36 Reviews
SALE PRICE: $173.99 1% OFF
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
-
3.9 of 5.0 with 3 Reviews
SALE PRICE: $183.21 7% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613189-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613189-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.
-
3.9 of 5.0 with 44 Reviews
SALE PRICE: $183.52 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611104-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611104-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block. A square gage block can retain stable orientation both longitudinally and laterally. A wide range of application measurements can be made, including cutting tool positioning, angle measurement with a sine bar, taper measurement with a roller, and inspection of depth micrometers.
-
3.9 of 5.0 with 39 Reviews
SALE PRICE: $190.72 5% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS410-II-R
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS410-II-R
Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.
-
3.9 of 5.0 with 23 Reviews
SALE PRICE: $195.00 1% OFF
Manufacturer: Particles Plus, Inc.
Brand: Particles Plus
Model: EE-80014A
Manufacturer: Particles Plus, Inc.
Brand: Particles Plus
Model: EE-80014A
The 8000 series handheld particle counter temperature and relative humidity probe provides accurate, reliable, and responsive indication of environmental conditions when attached to the SMART sensor port of the 8000 series instruments. Data is conveyed through the SMART peripheral bus and saved in to the instrument's Memory for later retrieval and reporting.
-
3.9 of 5.0 with 36 Reviews
SALE PRICE: $195.76 12% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
-
3.9 of 5.0 with 43 Reviews
SALE PRICE: $199.95 1% OFF
Manufacturer: iGaging
Brand: iGaging
Manufacturer: iGaging
Brand: iGaging
36 pc GRADE AS-0 Gage Block Set USA N.I.S.T. CERTIFIEDEach set comes with a certificate of calibration traceable to NIST and each gage block is etched with a unique serial number. The certificate was issued by the factory at the time of manufacture. Features:Super High ToleranceEach block is marked with a serial number matching the included NIST certificateGrade AS-036 PiecesIncluded:1 Block 0.050 10 Blocks 0.1000 thru 0.1009 In Step of 0.0001"9 Blocks 0.101 thru 0.109 In Step of 0.001"9 Blocks 0.110 thru 0.190 In Step of 0.01"4 Blocks 0.200 thru 0.500 In Step of 0.1"2 Blocks 1.000 thru 2.000 In Step of 1.000"1 Block 4.000 Wood Case
-
3.9 of 5.0 with 13 Reviews
SALE PRICE: $201.63 1% OFF
Manufacturer: ifm electronic gmbh
Brand: IFM Efector
Model: PX9116
Manufacturer: ifm electronic gmbh
Brand: IFM Efector
Model: PX9116
Electronic Pressure Sensor, Measuring Range: 0...30 Psi, Process Connection: 1/4''Npt A / M5 I, 3-Wire, Dc, Operating Voltage: 16...32 V Dc, Current Consumption: 18 Ma, 0...10 V Analog, M12 Connector, E1 Compliant, Housing Material: Stainless Steel 316L / 1.4404 Fpm (Viton) Pa Epdm/X (Santoprene), Materials (Wetted Parts): Stainless Steel (303S22) Ceramics Fpm (Viton).
-
3.9 of 5.0 with 15 Reviews
SALE PRICE: $218.50
Manufacturer: INSIZE
Brand: INSIZE
Model: 4112-C10
Manufacturer: INSIZE
Brand: INSIZE
Model: 4112-C10
Individual steel gage block, 10", grade as-2.
|
|