Calibration - Page 234

Manufacturer: Martel Electronics Brand: Martel Electronics Model: 1919698

As with the original high accuracy BetaGauge P.I. PRO gauges, the BetaGauge PIR PRO takes the concept of a simple analog Test Gauge and combines it with the accuracy of digital technology. The new Reference Class gauges provide exceptional performance with ±0.04% of reading accuracy, especially when operated below 50% of their range. The BetaGauge PIR PRO builds on the proven performance of the BetaGauge PIR with a new purpose designed Zinc-Aluminum Alloy High Pressure Cast housing. The new housing improves the environmental integrity of the gauge in a lighter and smaller yet more rugged form factor

Manufacturer: Transmation Brand: Transmation Model: 90-MP1

Manufacturer: Sharpe Brand: Sharpe

Sharpe 24A555

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4401-0014

HHIP grade b ledge 0 black granite surface plate is checked by an auto-collimator for overall accuracy assurance. Granite surface plates meet or exceed Federal specifications ggg-p-463c. Includes a certificate of inspection. Accuracy is +/-.0002". it measures 36" Length by 24" width by 4" height.

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-13

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 50.00 PSI Range.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV401

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: Martel Electronics Brand: Martel Electronics Model: 1919159

BetaGauge PI PRO Digital Test Gauge takes the concept of an analog Test Gauge, and brings it to a new level. The NEW BetaGauge P. I. PRO combines the accuracy of digital technology with the simplicity of an analog gauge and achieves performance, ease-of- use, and a feature set unmatched in the pressure measurement world. The BetaGauge PI PRO builds on the proven performance of the BetaGauge PI with a new purpose designed Zinc-Aluminum Alloy High Pressure Cast housing. The new housing improves the environmental integrity of the gauge in a lighter and smaller yet more rugged form factor.

Manufacturer: Fluke Calibration Brand: Fluke Model: 9143-INSF

INSERT, F,9143,0.25(IN) REF,CMP(MM) HLS

Manufacturer: Palmer Wahl Instrumentation Group Brand: Wahl Instruments Model: HSICBB-P

The Wahl HSICBB-P is a portable, ambient temperature black body used for single point calibration verification and checking of thermal imaging cameras and point infrareds. Affordable and easy to use, simply turn the black body on and choose either °F or °C. Set your thermal imaging camera or infrared thermometer to the correct emissivity, aim at the target area and compare readings. The result will confirm that your unit is within tolerance, and you can calculate the correction for zero error. Unit is housed in a watertight IP67 carrying case. Target area is 3" in diameter, concentric rings with integral 4 wire RTD sensor. Operating range is -40° to 158°F (-40° to 70°C), user selectable. System Accuracy is ±0.3°F or ±0.2°C over entire range. Display resolution is 0.1°, with an update rate of 10 seconds. Repeatability of 0.1°F or C. Emissivity is 0.95 ± 0.02. Size: 9.12" x 7.56" x 4.32" (23.2 cm x 19.2 cm x 11.1 cm). Weight: 2.85 pounds (1.29 kg).

Manufacturer: Fluke Corporation Brand: Fluke Model: 3024413

Fluke 3 phase mini current clamp set for power quality logger. 1A/10A Current.