Calibration - Page 238

Manufacturer: Flexbar Brand: Flexbar

Inch Gage Indicator Ball with 4-48 stems for Flexbar Precision Indicator Gage Ball SystemTM (Size: .8750); Precision Grade Gage Balls with affixed threaded stems for use with dial gages and calipers. Easy to use and enables you to measure critical internal taper angles, taper openings, chamfers, groove locations and hole depths both quickly and accurately. Precision Indicator Gage Ball System eliminates complicated and costly setups with sine plates (gage block), optical comparators, flush pin gages, plug gages, chamfer, micrometers and similar checking devices for any related taper bore dimensions. System includes: a set of thirty-one balls chrome steel hardened to 63RC, ground and lapped, and certified to grade 25 Accuracy °.0001 inch diameter, sphericity .000025 inch, sizes ranging from .0938 to 1.2500 with affixed 4-48 threaded indicator stems.

Manufacturer: Flexbar Brand: Flexbar

Inch Gage Indicator Ball with 4-48 stems for Flexbar Precision Indicator Gage Ball SystemTM (Size: 1.0000); Precision Grade Gage Balls with affixed threaded stems for use with dial gages and calipers. Easy to use and enables you to measure critical internal taper angles, taper openings, chamfers, groove locations and hole depths both quickly and accurately. Precision Indicator Gage Ball System eliminates complicated and costly setups with sine plates (gage block), optical comparators, flush pin gages, plug gages, chamfer, micrometers and similar checking devices for any related taper bore dimensions. System includes: a set of thirty-one balls chrome steel hardened to 63RC, ground and lapped,and certified to grade 25 Accuracy °.0001 inch diameter, sphericity .000025 inch, sizes ranging from .0938 to 1.2500 with affixed 4-48 threaded indicator stems.

Manufacturer: Ohaus Brand: Ohaus Model: 80850123

Weight sets are used in laboratory functions to verify mass at a very precise level of accuracy such as ASTM or OIML.Features. ASTM Class 6 Cylindrical Weights 50 mg.

Manufacturer: Ohaus Brand: Ohaus Model: 80780310

The Ohaus metric, stainless steel calibration weight meets International Organization of Legal Metrology (OIML) Class F1 specifications and designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class F1 specifications for use calibrating high-precision top loading balances with a readability as low as 0.01g to 0.001g.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found” mass correction (for recalibration), “As Left” mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certi...

Manufacturer: Fluke Brand: Fluke Model: 4617784

Fluke AC288 Sure Grip Terminal Block Probe.

Manufacturer: Flexbar Brand: Flexbar

Individual Precision Grade Gage Ball Size: 22mm. Chrome Steel Hardened To 63RC, Ground and Lapped Certified to Grade 25 Accuracy°.0001" dia.,000025" sphericity* Inch and metric sizes available.

Manufacturer: Starrett Brand: Starrett Model: 234A-3

The rod or "standard" is for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gauges, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. It is made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. Available with insulated handle to minimize expansion by heat when held in the hand.

Manufacturer: HHIP Brand: HHIP Model: 4101-0978

.800" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".

Manufacturer: HHIP Brand: HHIP Model: 4101-0980

.900" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".

Manufacturer: Ohaus Brand: Ohaus Model: 80780261

The Ohaus metric, stainless steel calibration weight meets International Organization of Legal Metrology (OIML) Class E2 specifications and designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class E2 specifications for use as a reference standard calibrating other weights, and calibrating high precision analytical balances with readabilities as low as 0.1mg to 0.01mg. The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found” mass correction (for recalibration), “As Left” mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidel...