|
|
-
3.8 of 5.0 with 36 Reviews
SALE PRICE: $133.80
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Center Point for Square Gage Block
-
3.8 of 5.0 with 40 Reviews
SALE PRICE: $134.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611143-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611143-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.
-
3.8 of 5.0 with 17 Reviews
SALE PRICE: $134.80 1% OFF
Manufacturer: Ohaus
Brand: Ohaus
Model: 80850297
Manufacturer: Ohaus
Brand: Ohaus
Model: 80850297
|
The Ohaus metric, stainless steel precision calibration weight meets American Society for Testing and Materials (ASTM) Class 4 specifications, and is designed for use as a reference standard for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. A tapered neck enables the weight to be lifted with tweezers, reducing the risk of contaminants adhering to the weight. The weight meets ASTM E617, Class 4 specification for use as a reference standard for calibrating semi-analytic balances, and for student use. An optional National Voluntary Laboratory Accreditation Program (NVLAP) certificate ensures precision and traceability. The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration we...
-
3.8 of 5.0 with 32 Reviews
SALE PRICE: $144.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619071
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619071
-
3.8 of 5.0 with 14 Reviews
SALE PRICE: $144.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619070
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619070
-
3.8 of 5.0 with 47 Reviews
SALE PRICE: $144.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614801-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614801-541
|
The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke...
-
3.8 of 5.0 with 49 Reviews
SALE PRICE: $145.00 1% OFF
Manufacturer: Fluke Calibration
Brand: Fluke
Model: 5013-1L
Manufacturer: Fluke Calibration
Brand: Fluke
Model: 5013-1L
science-lab-instruments
-
3.8 of 5.0 with 4 Reviews
SALE PRICE: $147.53 1% OFF
Manufacturer: Rice Lake Weighing Systems
Brand: Rice Lake
Manufacturer: Rice Lake Weighing Systems
Brand: Rice Lake
Use RICE LAKE® stainless steel cylinder weight for routine calibration of scales or verification checks. Type 2 design weight features a sealing cavity for adjusting material in 100g or larger weights. Applications include field standard for testing light industrial weighing devices. Includes traceable certificate documentation (meets ISO and traceability requirements for Classes 4 to 7 and Class F weights). This listing is for each. Technical Specification Item Calibration Weight Weight Style Cylinder Nominal Mass 20g Material Stainless Steel Class F Number of Pieces 1 Finish Satin Calibration Certificate Traceable Report Compliance NIST
-
3.8 of 5.0 with 13 Reviews
SALE PRICE: $148.00
Manufacturer: MSA
Brand: MSA
Manufacturer: MSA
Brand: MSA
Model Rp Calibration Gas
-
3.8 of 5.0 with 32 Reviews
SALE PRICE: $150.27 3% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613227-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613227-521
|
The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic, which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the m...
|
|