|
|
-
3.8 of 5.0 with 19 Reviews
SALE PRICE: $181.36 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 83026
Manufacturer: Starrett
Brand: Starrett
Model: 83026
The use of surface plate covers to protect precision granite investment. Prevent abrasive build up on plates with cover made from heavy gauge vinyl with a soft interior lining. Cover provide a tough, durable, protective outside with a soft cushion inside.
-
3.8 of 5.0 with 2 Reviews
SALE PRICE: $183.83 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611852-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611852-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.
-
3.8 of 5.0 with 41 Reviews
SALE PRICE: $185.96 2% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Note: 1) Maximum permissible cylindricity error: making no allowance for a rim of 1 mm. 2) Uncertainty of measurement Accuracy: The value is determined through a 2-point measurement taken at half - height of the setting ring. The measuring direction is marked with 2 strokes.
-
3.8 of 5.0 with 29 Reviews
SALE PRICE: $189.00 1% OFF
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: STDP1
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: STDP1
|
Certified coating thickness standards are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, Defelsko certified coating thickness standards have measured values traceable to a national metrology institution. Used to verify the accuracy and operation of any type 1 (mechanical) and type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage. Ideal for use in the calibration lab, in the field or on the factory floor. Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box. Individually serialized for traceability to NIST or PTB - includes a certificate of calibration. Certified and labeled in both metric and imperial units. Defelsko P series polystyrene block. For PosiTector 6000 FT, FTS, NTS and FNTS. Approximate thickness: 375 micrometer / 15 mils for plate 1; 2mm / 80 mils for plate 2; 4.5mm / 185 mils for plate 3; 6.5mm / 250 mils for plate 4. Coating/substrate: polystyrene blocks. Accuracy: +/- (2.5 micrometer + 0.05 percent of thickness); +/- (0.1 mil + 0.05 percent of thickness). Measures 2-3/4" length by 1-1/2" width.
-
3.8 of 5.0 with 45 Reviews
SALE PRICE: $195.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Brinell Test Block. Brinell Test Blocks are made of only the highest quality steel and aluminum. The impressions in the test bars are made with a Brinell machine with an accuracy maintained by a proving ring traceable to the National Institute of Standards and Technology (NIST). Before Test Blocks are certified, impressions are double-checked with an electronic microscope accurate to .01mm. Each Test Block exceeds all ASTM-E10 Standards to provide the highest degree of accuracy.
-
3.8 of 5.0 with 49 Reviews
SALE PRICE: $199.00 1% OFF
Manufacturer: ifm electronic gmbh
Brand: IFM Efector
Model: PX3229
Manufacturer: ifm electronic gmbh
Brand: IFM Efector
Model: PX3229
Electronic Pressure Sensor, Measuring Range: -14,5...0 Psi, Process Connection: 1/4''Npt A / M5 I, 2-Wire, Dc, Operating Voltage: 9,6...32 V Dc, 20...4 Ma, Quick Disconnect, M12 Connector, E1 Compliant, Housing Material: Stainless Steel 316L / 1.4404 Fpm (Viton) Pa Epdm/X (Santoprene), Materials (Wetted Parts): Stainless Steel (303S22) Ceramics Fpm (Viton).
-
3.8 of 5.0 with 42 Reviews
SALE PRICE: $199.00 1% OFF
Manufacturer: ifm electronic gmbh
Brand: IFM Efector
Model: PX9134
Manufacturer: ifm electronic gmbh
Brand: IFM Efector
Model: PX9134
-
3.8 of 5.0 with 29 Reviews
SALE PRICE: $199.00 1% OFF
Manufacturer: GASCO
Brand: Gasco
Manufacturer: GASCO
Brand: Gasco
Stainless Steel regulator for Reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es
-
3.8 of 5.0 with 17 Reviews
SALE PRICE: $199.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS410-B
Color: Blue
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS410-B
Color: Blue
10:1 attenuation value. 300 MHz bandwidth. CAT III 1000V, CAT IV 600V voltage. Lead free / RoHS Compliant. 1M Input resistance. Includes ground leads with clips, hook clips, test probes. For 190 Series II ScopeMeter test tool. Blue color.
-
3.8 of 5.0 with 41 Reviews
SALE PRICE: $204.19 15% OFF
Manufacturer: TES Instruments
Brand: TES Instruments
Model: PROVA 100
Manufacturer: TES Instruments
Brand: TES Instruments
Model: PROVA 100
Product Features: 4-20mA, with 1 μ A resolution, Basic Accuracy 0.025% + 5 μ A, Auto-Ramp and Easy Step Functions, 1-100% Input, 0-20mA, 0-24mA Selectable, Easy Just-Type-in Number Operation.
|
|