Calibration - Page 253

Manufacturer: Fluke Calibration Brand: Fluke Model: 4180-CASE

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Corporation Brand: Fluke Model: ITP120

Designed for use with Fluke ScopeMeter 120-series. The probe connects to the optical port of the ScopeMeter 120, and features isolated external triggering, for measurements that require external triggering or triggering on floating reference signals. Probe length is 1.2m (48"). The probe includes a hook clip with ground lead, and a 9-Volt Alkaline battery. Input impedance: 10MO in parallel with 15pF. Trigger level: TTL compatible (High equals to 2V, Low equals to 0.8V). Minimum pulse width: 7 micro seconds. Maximum frequency: 50 kHz. Maximum signal voltage: 600 Vrms, CAT II per IEC1010-2-031. Maximum voltage to ground: 600 Vrms, CAT II per IEC1010-2-031. Battery type: Alkaline 9 volt, NEDA, IEC6LR61. Battery life: 60 hours.

Manufacturer: Fluke Calibration Brand: Fluke Model: 9317

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 981-102

Manufacturer: Fluke Corporation Brand: Fluke Model: I3000 FLEX-4PK

The i3000s Flex is an AC current clamp utilizing the Rogowski principle. It can be used to measure currents up to 3000A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas. Three ranges: 30A, 300A and 3000A, 1, 10 or 100 mV/A output. Ideal for current measurement on thick and hard to reach conductors without breaking the circuit. Maximum conductor diameter 178mm. CAT III 600V safety rating. Current ranges: 30A, 300A, 3000A AC rms. Output sensitivity (AC-coupled): 100 mV, 10 mV, 1 mV per A. Load impedance: 100 kilo ohm minimum. Accuracy at +25 degree C: +/-1 percent of range (45 Hz to 65 Hz). Linearity 10 to 100 percent of range: +/-0.2 percent of reading. Noise: 8 mV AC rms (30 A), 2 mV AC rms (300A, 3000A). Frequency range: 10 Hz to 50 kHz (-3 dB). Phase error: less than +/-1 degree (45 Hz to 65 Hz), +/-10 degree (at 20 kHz). Position sensitivity with cable greater than 25 mm from the coupling: +/-2 percent of range. External field with cable greater than 200 mm from the head: +/-1 percent of range. Power supply: 2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator or dedicated external power supply. Temperature coefficient: +/-0.08 percent of reading per degree C. Working voltage: 600V AC rms or DC. Head circumference: 610mm. Head cable diameter: 14.3mm. Head bend radius: 38.1mm. Cable length (head to electronics): 2m. Output connection: 0.5m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter. Operating temperature range: -20 to +90 degree C (-4 to 190 degree F) (head), -20 to +85 degree C (-4 to 185 degree F) (electronics). Storage temperature range: -40 to +105 degree C (-40 to 221 degree F) (head), -20 to +85 degree C (-4 to 185 degree F) (electronics). Operating humidity: 15 to 85 percent (non-condensing).

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 516-499

Step value between adjacent blocks: 300µm, 100µm, 50µm, 20µm

Manufacturer: Starrett Brand: Starrett Model: 81572

Angle plates provide a convenient and practical means of clamping and holding work in a vertical position. Their excellent finish and flatness make them very compatible for use with granite surface plate accuracies. The angle plates are available with either 2 or 4 finished faces. The 2-face angle plate has the bottom and the adjacent square face finished flat and square to one another.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 516-605

The Mitutoyo 516-605 gage block accessory set includes 14 pieces for assembling rectangular gage blocks over 100 mm into a precision measuring instrument. The set includes (5) gage block holders, (3) adapters, (1) base, (2) half round jaws, (2) plain jaws, and (1) scriber point, in a wood case. Founded in Tokyo in 1934, Mitutoyo is a leader in the metrology field, producing high-quality measurement products including mechanical, dimensional gauging products, focusing on micrometers, calipers, indicators, and other measurement tools, as well as output gauges, interfaces, data collectors, and analysis software. Mitutoyo formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, Illinois, with additional locations in the U.S. and Canada.

Manufacturer: Starrett Brand: Starrett Model: 82240

Manufacturer: Starrett Brand: Starrett Model: 82238