|
|
-
3.8 of 5.0 with 46 Reviews
SALE PRICE: $2,395.00 16% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-402-26
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-402-26
|
The Mitutoyo 516-series Grade 0 Steel Square Inch Gage Block Set includes a set of square-shaped, high-carbon, high-chrome steel gage blocks with nominal length engraved in inches on each, and is supplied with a Mitutoyo inspection certificate that states that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade 0 standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of each individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Grade 0 gage blocks are commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. High-carbon, high-chrome steel has a high hardness for minimum deterioration, and is selected for its wear-resistance. These gage blocks have a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. The nominal length of each block is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on each block for traceability. The set comes with a fitted wooden case for storage.The set includes a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the blocks meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measur...
-
3.8 of 5.0 with 46 Reviews
SALE PRICE: $3,270.00 1% OFF
Manufacturer: Fluke Calibration
Brand: Fluke
Model: 1523-P3-156
Manufacturer: Fluke Calibration
Brand: Fluke
Model: 1523-P3-156
You need accuracy for compliance, product yields, energy savings, and consistent results. The 1523/24 uses current reversal, a technique used in high-end instruments that eliminates thermal EMFs, for precision temperature measurements. Specifications are guaranteed from -10 ºC to 60 ºC ambient. Special precision resistors and a highly stable reference voltage source keep 1523/24 accuracy virtually insensitive to environmental temperature. Like all Fluke handheld tools, the 1523/24 Reference Thermometers endure rigorous testing in temperature extremes and under harsh conditions of vibration, so you can take them anywhere you need to go. An optional magnetic hanger allows you to hang the thermometer for easy viewing while freeing your hands to focus on the job.
-
3.8 of 5.0 with 3 Reviews
SALE PRICE: $5,688.50 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 80886
Manufacturer: Starrett
Brand: Starrett
Model: 80886
Even distribution of large quartz crystals provides a smooth finish, which significantly reduces wear on the surface plate and the instruments used on it. Fine micro-finish, combined with the natural voids in the surface, prevents wringing and provides a velvety-smooth tool action. Non-quartz-bearing granite in average daily use requires resurfacing about once a year, while crystal pink plates used in these same plants have required resurfacing only once every three to five years, on average. Great surface hardness and wear resistance the highest percentage of quartz crystals of any granite plate. Quality and economy combined. Comparable to black granite plates while outwearing them as much as 5 to 1. Standard-size plates are mounted on resilient support pads, providing isolation from normal vibration and a non-distorting 3-point suspension. Packed one per crate with skids for forklift handling.
-
3.8 of 5.0 with 4 Reviews
SALE PRICE: $6,432.00 1% OFF
Manufacturer: COLE-PARMER
Brand: GE
Manufacturer: COLE-PARMER
Brand: GE
Dry block calibrator, models 16108-04 and 16108-05, is easy to set up and operate. Plus, its lightweight yet robust design makes it ideal for field use. What's Included: power cord and certificate of calibration supplied by the manufacturer. Models 16108-04 and 16108-05 include a well insert adapter sleeve and the insert adapter removal tool. Stability and high performance for any type, shape, or size temperature sensor calibration Rapid heating and cooling for quick calibration protocol changes Easy access to common calibration temperatures via four programmable setpoints Define a test profile with programmable ramp rates and soak times for complex calibration procedures Communicate with your PC using optional USB converter and MODBUS RTU (JBUS)
-
3.8 of 5.0 with 33 Reviews
SALE PRICE: $8,769.90 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 80892
Manufacturer: Starrett
Brand: Starrett
Model: 80892
Even distribution of large quartz crystals provides a smooth finish, which significantly reduces wear on the surface plate and the instruments used on it. Fine micro-finish, combined with the natural voids in the surface, prevents wringing and provides a velvety-smooth tool action. Non-quartz-bearing granite in average daily use requires resurfacing about once a year, while crystal pink plates used in these same plants have required resurfacing only once every three to five years, on average. Great surface hardness and wear resistance the highest percentage of quartz crystals of any granite plate. Quality and economy combined. Comparable to black granite plates while outwearing them as much as 5 to 1. Standard-size plates are mounted on resilient support pads, providing isolation from normal vibration and a non-distorting 3-point suspension. Packed one per crate with skids for forklift handling.
-
3.7 of 5.0 with 21 Reviews
SALE PRICE: $3.17 4% OFF
Manufacturer: Demarkt
Brand: Demarkt
Manufacturer: Demarkt
Brand: Demarkt
Product FeaturesSuitable for general laboratory, commercial, and educational use.OIML Class: M250g Calibration weightCalibrates Digital scales that require 50g of weight General use 50g Calibration Weight
-
3.7 of 5.0 with 18 Reviews
SALE PRICE: $5.99 2% OFF
Manufacturer: ADC
Brand: ADC
Manufacturer: ADC
Brand: ADC
Gauge Retaining Ring for #802
-
3.7 of 5.0 with 49 Reviews
SALE PRICE: $6.50 2% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Individual Precision Grade Gage Ball Size: 1.0625 (1-1/16). Chrome Steel Hardened To 63RC, Ground and Lapped Certified to Grade 25 Accuracy°.0001" dia.,000025" sphericity* Inch and metric sizes available.
-
3.7 of 5.0 with 21 Reviews
SALE PRICE: $10.00 10% OFF
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780025
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780025
|
The Ohaus metric, stainless steel electronic balance calibration weight meets American Society for Testing and Materials (ASTM) Class 1 specifications, and is designed for calibrating other weights, or electronic balances and scales. The weight has straight sides and a flat top that allows weights to be stacked. It is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets ASTM E617, Class 1 specification for use as a reference standard for calibrating other weights and high-precision balances with readabilities as low as 0.1mg to 0.01mg. An optional National Voluntary Laboratory Accreditation Program (NVLAP) certificate ensures precision and traceability.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the ...
-
3.7 of 5.0 with 34 Reviews
SALE PRICE: $11.19 2% OFF
Manufacturer: HongLieven
Brand: HongLieven
Manufacturer: HongLieven
Brand: HongLieven
1 X Digital scale1 X User manualIn original package
|
|