Calibration - Page 257

Manufacturer: HHIP Brand: HHIP Model: 4101-0975

.650" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".

Manufacturer: HHIP Brand: HHIP Model: 4101-0974

.600" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000004/-.000002".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614192-541

The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks ...

Manufacturer: Fluke Corporation Brand: Fluke Model: AC285-FTP

Includes model a pair of red and black extra large alligator clips plus adaptors to securely attach the alligator clips to Fluke fused test probes FTP-1, FTPL-1, FTP and FTPL. SureGrip has rubber overmolded surfaces for a firm reliable grip. Multi-purpose tooth pattern grips anything from fine gauge wire to a 20mm (0.75") nut. Strong, nickel-plated steel jaws for a tight hold. Conforms to safety standard IEC61010-031:2002 +A1:2008, CAT III 1000V, CAT IV 600V. 10A maximum, pollution degree 2, 2000 m altitude. Operating temperature: -4 to 131 degree F, 95 percent RH. One-year warranty.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613165-551

The Mitutoyo grade AS-2 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide mater...

Manufacturer: DYNAMIC MIXER Brand: Dynamic Mixer Model: 510-1058

SPECIFICATIONS WEIGHT: .026 lb INNER DIAMETER: 1/2", 13 mm PART REFERENCE INFO DYNAMIC: 3516 DYNAMIC USA: 3516 MODEL REFERENCE INFO DYNAMIC VEGETABLE DICER MODELS: CL003

Manufacturer: Images SI Brand: Images SI

Radioactive sample of uranium ore. The ore sample material is Naturally Occurring Radioactive Materials (NORM). Counts Per Minute (CPM) activity rate listed on the label is determined using a GCA-07W Digital Geiger Counter that has an NRC certification. Activity level includes all radiation types: alpha, beta and gamma. Uranium Ore samples are useful for testing Geiger Counters. License exempt. Uranium ore sample size and CPM activity will vary. Shipped in labeled metal container as shown. Shipping Information: We are always in compliance with Section 13 from part 40 of the NRC Nuclear Regulatory Commission rules and regulations and Postal Service regulations specified in 49 CFR 173.421 for activity limits of low level radioactive materials. The item is shipped in accordance with Postal Service activity limits specified in Publication 52. Radioactive minerals are for educational and scientific use only. Images SI Inc., manufacturing electronic instruments and kits for over 25 years. Please note: Pictures of Geiger counters testing uranium ore sample and other picture(s) of nuclear equipment sold by Images SI Inc. are not included with uranium ore.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Designed for calibrating micrometers and zeroing vernier, dial, and digital calipers. 1/4" diameter rod with flat end.

Manufacturer: Mettler Toledo Brand: Mettler Toledo

A customized 3rd weight for your Mettler Toledo CarePacs. Use the ASTM Class 1 5 milligram weight to perform customized testing such as minimum weight determination. The 3rd weight perfectly fits into your CarePac carrying case.

Manufacturer: CALT Brand: Calt

Contactless Digitized Angle Sensor P3022-V1 P3022 series of miniature non-contact angle sensor works through the principle of electromagnetic induction, the angle is converted to an electrical signal. When the rotation angle of the object passed to the axis of rotation sensors, P3022 angle sensor outputs an electrical signal that is proportional to the rotational angle. P3022-V1 is rotated clockwise output corresponding to 0-360 0-5VDC. Outer diameter:22mm Shaft diameter:6mm Voltage supply:5V DC Signal output:0~5V Resolution ratio:4096(12bits) Effective electrical angle: 360degree Independent Linearity tolerance:0.3% Mechanical Travel: 360 degree (Endless) Protection Degree:IP40 Starting Torque: