Calibration - Page 259

Manufacturer: AEMC Brand: AEMC Model: 2130.59

The AEMC calibration checker works with AEMC ground resistance testers. The testing range is 25 Ω. It is used with models 3620, 3640, 4500, 4610, 4620, and 4630. AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613623-531

The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuri...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 619022

Manufacturer: Troemner Brand: Troemner

Weight, Individual, Aluminum 5mg weight, stainless steel OIML style, calibrated to OIML Class F1. Weight is provided in a polypropylene case. Supplied with Troemner's NIST/NVLAP Weight Calibration Certificate. This listing is for Each _DELETE_

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611635-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.

Manufacturer: Grundens Brand: Grundens Color: Black

Grundens Weather Gage Jacket WJ200 Non Hooded- Softshell is a unique fabric that offers the protection and abrasion resistance of a shell, with the soft and easy wearing of a fleece. These fabric features are combined with a water repellent and breathable membrane to provide a jacket suitable for all but the most extreme weather conditions. The Weather Gage jacket has water repellent zippers and a nice high collar. The cinch cord hem controls also lead into the hand warmer pockets. There is a large napoleon pocket on the outside with a water repellent zipper and a large inner chest pocket that is MP3 friendly with a exit for a headphone jack. The wrists have a velcro tab for cinching tight. Sizes and colors available as displayed.

Manufacturer: TTC Brand: TTC

Use for drilling, milling, grinding and set-up applications.

Manufacturer: TTC Brand: TTC

Use for drilling, milling, grinding and set-up applications.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 10014

The Mitutoyo Series 981 010014 angle block is for creating or measuring 30-, 60-, and 90-degree angles, and is suitable for use in home or commercial shops for working with wood or metal. This instrument has an accuracy of + or – 40 seconds. It is constructed of steel hardened to more than 55 on the Rockwell hardness scale C (HRC) for durability. The entire block is precision ground for accuracy. The perpendicular edges of this block are 3.46" and 2", the angled edge is 4", and the block is 0.276" thick.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Rice Lake Brand: Rice Lake

The Rice Lake metric, stainless steel calibration weight meets American Society for Testing and Materials (ASTM) Class 4 specifications, has a density of 7.84, and is designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The kit includes an electronic calibration weight, a handling glove, and a protective case. The weight meets ASTM E617, Class 4 specification for use as a reference standard for calibrating semi-analytic balances, and for student use.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.Rice Lake Weighing Systems manufactures weight-related and process-control equipment for use in research, sci...