Calibration - Page 276

Manufacturer: Sharpe Brand: Sharpe

Sharpe 9984

Brand: Gasco

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613135-531

The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement o...

Manufacturer: HHIP Brand: HHIP Model: 3402-1032

4 1/2 X 5 X 6" Non-Slotted Right Angle Plate | Widely used for fixture components. | All faces, ends and edges are finished square and parallel. | The opening provides a convenient hand grip for handling. | Square within 0.0005" per 6". | Parallel within 0.00025" per 6".

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: IM5116

Inductive Sensor, Rectangular, Plastics, Sensing Range: 35 Mm, Non-Flush Mountable, 3-Wire, Dc Pnp, Operating Voltage: 10...36V Dc, Current Consumption: 20 Ma, Normally Open, Quick Disconnect, M12 Connector, 5 Positions Of The Sensing Face Selectable, Housing Material: Pa (Polyamide).

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

V-blocks are small part work holders. They are held in place with the assistance of a clamp. The grove allows a channel for the clamp to hold down the part being measured or modified.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.

Manufacturer: ABS Import Tools Brand: HHIP

USE ON MAGNETIC CHUCK | SINGLE 90° V-BLOCK | Universal-holds in any direction on the magnetic chuck. | Aluminum cast. | Ground all over. | Blocks transmit magnetism, are not magnetic. | V-BLOCKS: 90° Vee Capacity: Small Vee-1/2" , Large Vee-2"

Manufacturer: Fotronic Corporation Brand: Benchmark Scientific Model: W1000-200

Accuris Instruments offers a range of precision calibration weights that are ideal for calibration of your Accuris lab balances. The W1000-200 is the 200 gram weight and meets class F1 tolerance per OIML (International Organization of Legal Metrology) Recommendation R111. Made of highly polished, non-magnetic stainless steel, the W1000200 calibration weight comes in a protective plastic case.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 616135-531

The Mitutoyo grade 0 square gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a certificate of inspection, meets ASME B89.1.9.2002 standards, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to cal...

Manufacturer: Grizzly Brand: Grizzly

Crafted to maximize the accuracy of just about any setup for grinding and milling. This All Angle V-Block is supplied with 3- 3/8"-16 threaded holes so you can easily mount it to fixtures, jig plates or angle plates and hold round stock up to 1-1/4" in the horizontal or vertical positions. Hardened better than 45 on the Rockwell hardness scale for durability. Stirrup is supplied with adjustable clamp stop. Measures 3 5/8" X 1 7/8" X 1 7/8".