Calibration - Page 284

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613206-541

The Mitutoyo grade AS-1 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment...

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530819

The Fluke 810T noncontact tachometer attachment measures from 6 to 99,999rpm with accuracy to +/-0.05%, uses a laser beam, and has a 50cm cable. This noncontact tachometer is for with the Fluke 810 vibration tester, to measure the speed of motors, conveyor belts, and other moving and rotational systems. It measures from 6 to 99,999rpm with accuracy to + or - 0.05 percent. Its optical sensor is a laser beam that works at a distance of 1 to 100cm for user safety. Its integral 50cm cable connects the tachometer to the vibration tester for power and measurement data recording. It carries the CE mark to indicate compliance with applicable EU directives. This tachometer is suitable for measuring rotational speed in conjunction with vibration testing in mechanical or industrial engineering environments.Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Contact tachometers take measurements through direct contact with the moving surface, and can measure both rpm and surface speed. Typically, contact tachometers come with a range of attachments that can be used to measure speed on different kinds of rotary systems, which may include tips used for measuring shafts with a central hole or flat end surfaces, and rotary wheels for measuring conveyor belts. Noncontact tachometers take measurements from a distance using a beam of infrared light, and provide highly accurate measurements. Contact tachometers are an excellent choice for dirty and dusty environments; noncontact tachometers only calculate rpm but are considered safer because they do not require the operator to be in close contact with the moving surface. Contact/noncontact tachometers, also known as dual, or combination tachometers, can be used to take contact and noncontact measurements. Some tachometers can also take other types of measurements, such as count or frequency, while others can output data to a computer for analysis. Tachometers are used in applications such as automobile maintenance, mechanica...

Manufacturer: Rice Lake Brand: Rice Lake

The Rice Lake metric precision test weight is constructed of polished stainless steel, meets American Society for Testing and Materials (ASTM) Class 1 specifications, has a 7.95 density, and is designed for a variety of weighing operations. The weight can be adjusted by attaching other weights to the screw-knob. The weight is constructed of polished stainless steel for stability, resistance to corrosion, and low magnetic susceptibility, and a polished surface highlights wear that can affect weight precision. The set includes a precision test weight, a handling glove, and a protective case. The weight meets ASTM E617, Class 1 specification for use as a reference standard for calibrating other weights and high-precision balances with readabilities as low as 0.1mg to 0.01mg.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engine...

Manufacturer: Ohaus Brand: Ohaus

Weights from 5mg to 30kg are Stainless Steel. Weights from 1mg to 2mg are Aluminum. Weight Sets include a Polycarbonate Case. Individual Weights up to 500mg include a Polypropylene Case. Weights from 1g to 2kg include a Polycarbonate Case. Weights from 4kg to 30kg include a Polypropylene Case.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 516-804-26

The Mitutoyo 516-series Grade AS-1 Carbide Rectangular Inch Wear Gage Block Set includes a set of rectangular-shaped, tungsten carbide wear gage blocks with nominal length engraved in inches on each, and is supplied with a Mitutoyo inspection certificate that states that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade AS-1 standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of each individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. Grade AS-1 gage blocks are commonly used in workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. Tungsten carbide is harder than steel and ceramic for greater resistance to wear, and more resistant to thermal expansion for accuracy. Rectangular-shaped blocks provide accurate wringing. The nominal length of each block is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on each block for traceability. The set comes with a fitted wooden case for storage.The set includes a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the blocks meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611565-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.

Manufacturer: BLACKBOX NETWORK SERVICE Brand: Black Box Model: EME1TCAK-005

Connects a K-Type Thermocouple to a sensor hub.

Manufacturer: MXBAOHENG Brand: MXBAOHENG

Item specifics New: A brand-new1. Applications: The Pencil Hardness Tester is applicable to determine the hardness of coating film. It is suitable for labs and building sites. It also can examine the hardness of coating film on any direction. 2. Structure and working principle The instrument is mechanical. Three point (Two wheels, and a lead core) contact the tested surface always to ensure the pencil and the tested surface forms the angle of 45 degrees, so as to push the movement of the instrument, to complete the testing process. Speed: 1mm/second. 3. Standard Accessories 1). 13pcs* pencils： 6B、5B、4B、3B、2B、B、HB、H、2H、3H、4H、5H、6H 2). 1* Pencil hardness meter (500g) 3). 1* Cushion block 4). 1* Knife 5). 1* Eraser 6). 1* User manual Country of Manufacture: China We will arrange the shipment in 1-5 working days and it takes another 5-7 working days to reach you.

Manufacturer: Fluke Calibration Brand: Fluke Model: 5010-1L

science-lab-instruments