|
|
-
4.9 of 5.0 with 46 Reviews
SALE PRICE: $75.00
Manufacturer: Troemner
5 mg Analytical Precision Class 1 Weight with NVLAP Accredited Certificate Part # 7034-1W Weight Size 5 mg Detailed Style Description Flat with one end turned up for easy handling Class Class 1 Tolerance 0.010 mg Uncertainty 0.002 mg Certificate NVLAP Accredited Certificate Material 304 Stainless Steel Density 7.95 g/cm3 at 20°C Construction One-piece Dimensions (Weight Only) 0.140 x 0.105 x 0.060" Dimensions (Weight in Case) 2 x 2.5" Case Supplied in high quality polycarbonate case with red insert Origin Manufactured in the USA
-
4.9 of 5.0 with 29 Reviews
SALE PRICE: $75.77 8% OFF
Manufacturer: Troemner
Brand: Troemner
Manufacturer: Troemner
Brand: Troemner
Weight, Individual, Stainless Steel 10mg weight, stainless steel OIML style, calibrated to OIML Class F1. Weight is provided in a polypropylene case. Supplied with Troemner's NIST/NVLAP Weight Calibration Certificate. This listing is for Each
-
4.9 of 5.0 with 10 Reviews
SALE PRICE: $75.90 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614626-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614626-541
|
The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke...
-
4.9 of 5.0 with 29 Reviews
SALE PRICE: $76.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614202-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614202-541
|
The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks ...
-
4.9 of 5.0 with 18 Reviews
SALE PRICE: $78.81
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0981
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0981
1-5/16" Toolmaker's V-blocks & clamps. | Blocks have four 3/8"-26 tapped holes, two in the base and one on each side for attachment to an angle iron. The angle iron holding the block can then be attached to a lathe faceplate or held by a magnetic chuck. | Versatile tool for grinding, milling or drilling | A clearance hole for drilling or removing dowel pins is provided in the block | Blocks are hardened and precision ground | Side screw supports the block and prevents tilting.
-
4.9 of 5.0 with 18 Reviews
SALE PRICE: $78.81
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0981
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0981
1-5/16" Toolmaker's V-blocks & clamps. | Blocks have four 3/8"-26 tapped holes, two in the base and one on each side for attachment to an angle iron. The angle iron holding the block can then be attached to a lathe faceplate or held by a magnetic chuck. | Versatile tool for grinding, milling or drilling | A clearance hole for drilling or removing dowel pins is provided in the block | Blocks are hardened and precision ground | Side screw supports the block and prevents tilting.
-
4.9 of 5.0 with 22 Reviews
SALE PRICE: $79.00
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Precision V-Blocks and Clamps. All sides are ground Square and Parallel to each other. Matched Accuracy .0002" and numbered in pairs. Sturdy enough to be used in matching operation. supplied With two Clamps. Model No. 11088, Precision Precision V-Blocks & Clamps, 1 1/2" diameter
-
4.9 of 5.0 with 25 Reviews
SALE PRICE: $80.37 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611201-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611201-521
|
The Mitutoyo grade 00 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industri...
-
4.9 of 5.0 with 10 Reviews
SALE PRICE: $83.90
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780345
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780345
|
The Ohaus metric, stainless steel calibration weight meets International Organization of Legal Metrology (OIML) Class F1 specifications and designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class F1 specifications for use calibrating high-precision top loading balances with a readability as low as 0.01g to 0.001g.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certi...
-
4.9 of 5.0 with 21 Reviews
SALE PRICE: $84.23 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 3402-0954
Manufacturer: HHIP
Brand: HHIP
Model: 3402-0954
2.50 X 1.73 X 2.76" V-block & Clamp Set | 90° V groove accuracy are central, parallel and square with all surfaces within 0.0003". | Case is hardened and ground. | Clamps are included.
|
|