Calibration - Page 290

Manufacturer: Practical Instrument Electronics, Inc. Brand: PIECAL Model: 422

Calibrate with confidence with the Piecal 422 thermocouple type calibrator. Verify cold junction temperature and output secondary display of compensated millivolt setting and cold junction temperature. This calibrator features low profile switches that resist accidental damage, rubber boot and attached test leads, easy to read backlit display and rugged switches.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 516-611

The Mitutoyo 516-611 gage block accessory set includes 27 pieces for assembling square gage blocks into a precision measuring instrument. The set includes (2) 2 mm half round jaw, (2) 5 mm half round jaw, (2) plain jaw, (1) center point, (1) scriber point, (1) block base, (2) 1 1/4" flat head screws, (2) 5/8" flat head screws, (2) slotted head nuts, (2) 6"adjustable tie rods, (2) 4 1/2" adjustable tie rods, (1) 3" tie rod, (1) 2 1/4" tie rod, (1) 1 1/2" tie rod, (1) 3/4" tie rod, (2) studs, and (2) knurled head screws, in a wood case. Founded in Tokyo in 1934, Mitutoyo is a leader in the metrology field, producing high-quality measurement products including mechanical, dimensional gauging products, focusing on micrometers, calipers, indicators, and other measurement tools, as well as output gauges, interfaces, data collectors, and analysis software. Mitutoyo formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, Illinois, with additional locations in the U.S. and Canada.

Manufacturer: Starrett Brand: Starrett Model: 81970

Three-face granite tri-squares provide an excellent, economical way for accurately checking the X-Y-Z axes on CNC machine tools and coordinate measuring machines. Lying in the horizontal position, with an indicator in the spindle, the X and Y axes can be checked for 90 degree squareness. With the square in the vertical position, tracing along the vertical edge of the square can check the perpendicularity of the Z axis. Granite tri-squares may also be used in the same manner that steel squares would be used for the direct checking of squareness and straightness.

Manufacturer: COLE-PARMER Brand: Fowler

science-lab-supplies

Manufacturer: Starrett Brand: Starrett Model: 82242

Manufacturer: Hardware Resources Brand: duBois Model: TB4-POP Color: cherry

Product shown unfinished. 2.75 in. W x 1 in. D x 4 in. H. Hardware Resources is proud to present the du Bois Collection of Moulding and Domestic Wood Products. Each piece of du Bois moulding is kiln dried until it contains only 6-8% moisture, ensuring that the moulding will not swell, shrink or split when installed. Each piece is hand-fed into the saws and monitored closely as each unique profile is cut into the wood.

Manufacturer: www.meter-depot.com Brand: meter-depot.com Model: TC-02 Color: black handle and yellow cable

This is a small size and inexpensive insertion thermocouple with a K-Type sensor. The sensor is housed at the tip of a 3 inch long stainless steel probe, which comes with a 2 inch long handle. It has a miniature type connector that will work with digital K-type thermometers. This probe can be inserted in liquids or any object you like to measure. It is much easier to clean than the thermocouple wire that comes with many thermometers.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 0532-4818x5

Table Slot T: 5/8"; Slot Height: 11/32", Overall Height: 5/8"

Manufacturer: Allen Lighting Brand: Allen Lighting Color: Silver

Specifications: 1. Color of calibration weight: Sliver 2. Color of the box: Blue 3. Material: Steel 4. Weight: 9 OZ 5. Size: 8*5.5*4.5cm Package inclded: 1* 5g weight 1* 10g weights 2* 20g weights 1* 50g weights 1* 100g weight 1* Tweezers

Manufacturer: Ohaus Brand: Ohaus Model: 80780410

The Ohaus metric calibration weight set meets International Organization of Legal Metrology (OIML) Class F1 specifications and is designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class F1 specifications for use calibrating high-precision top loading balances with a readability as low as 0.01g to 0.001g. The set of 20 weights includes two each of 20g, 2g, 200mg, 20mg, 2mg, and one each of 50g, 10g, 5g, 1g, 500mg, 100mg, 50mg, 10mg, 5mg, 1mg, tweezers, and a protective case. Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.Ohaus manufactures scales and balances for laboratory,...