|
|
-
3.5 of 5.0 with 2 Reviews
SALE PRICE: $125.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 615105-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 615105-531
|
The Mitutoyo grade 0 square wear gage block is made of tungsten carbide, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of tungsten carbide, which is harder than steel and ceramic for greater resistance to wear, and is more resistant to thermal expansion for accuracy. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior.This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke bloc...
-
3.5 of 5.0 with 2 Reviews
SALE PRICE: $125.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 615105-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 615105-531
|
The Mitutoyo grade 0 square wear gage block is made of tungsten carbide, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of tungsten carbide, which is harder than steel and ceramic for greater resistance to wear, and is more resistant to thermal expansion for accuracy. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior.This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke bloc...
-
3.5 of 5.0 with 39 Reviews
SALE PRICE: $125.22 5% OFF
Manufacturer: Rice Lake
Brand: Rice Lake
Manufacturer: Rice Lake
Brand: Rice Lake
|
The Rice Lake metric, stainless steel test weight set meets American Society for Testing and Materials (ASTM) Class 2 specifications, and is designed for calibrating other weights, or electronic balances and scales. The weight set is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets ASTM E617, Class 2 specifications for use as a reference standard for calibrating high-precision top-loading balances with a readability as low as 0.01g to 0.001g. The set includes one weight each of 50g, 30g, 20g, 10g, 5g, 3g, 2g, and 1g, tweezers, and a protective case. Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.Rice Lake Weighing Systems manufactures weight-related and process-control ...
-
3.5 of 5.0 with 48 Reviews
SALE PRICE: $126.51
Manufacturer: HHIP
Brand: Pro-Series by HHIP
Manufacturer: HHIP
Brand: Pro-Series by HHIP
Toolmaker's V-Blocks with Clamps for the Slots ~ 2-1/2 W X 1-3/4 H X 2-3/4 L ~ Small Vee is 1" ~ Large Vee is 1-3/16" ~ Made of hardened tool steel machined & ground in pairs to close tolerance. ~ A versatile tool for toolmakers & machinists. ~ Clamps can easily slide in and are included. ~ Both side have different Vee sizes. ~ Weight is 6 lbs.
-
3.5 of 5.0 with 42 Reviews
SALE PRICE: $129.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613201-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613201-531
|
The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement o...
-
3.5 of 5.0 with 3 Reviews
SALE PRICE: $129.00
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Rockwell Certified Hardness Test Block. A-Diamond. Manufactured from the highest q steel with a special heat treat and cold treat process which insures maximum consistency and repeatability. Accuracy exceeds ASTM E10, E18, E92 and E384 standards. HRA 78.5
-
3.5 of 5.0 with 13 Reviews
SALE PRICE: $130.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
V-Blocks - Matched pairs. Made of High Quality Fine grained Cast iron, stress relieved. Ideal for Holding round and irregular shape parts in drilling, machining, inspection, etc. Accurately Machined With 90° Vee in Center. Machined parallel to base within .001".
Supplied and priced in matched pairs.
-
3.5 of 5.0 with 13 Reviews
SALE PRICE: $132.49 1% OFF
Manufacturer: FOWLER
Brand: Fowler
Manufacturer: FOWLER
Brand: Fowler
V''BLOCK SET -2-475-500 MAXIMUM CAPACITY OF VEE: ASSORTED DIMENSION: 1-
-
3.5 of 5.0 with 41 Reviews
SALE PRICE: $134.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611174-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611174-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.
-
3.5 of 5.0 with 18 Reviews
SALE PRICE: $134.99 1% OFF
Manufacturer: Phase II Plus
Brand: Phase II Plus
Model: PHT1300-01
Manufacturer: Phase II Plus
Brand: Phase II Plus
Model: PHT1300-01
Applications Portable hardness test for metals.
|
|