Calibration - Page 303

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611212-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.

Manufacturer: United Scientific Supplies Brand: United Scientific Supplies Model: 77736

United Scientific Supplies metric, black enamel, hooked weight set is designed for use with hanging balances, and for applications that include pressure, torque, and tensile strength testing (set of 9). Black-enamel coated cast iron is durable and corrosion-resistant. The set of nine weights includes two each of the 200g and 20g weights, one each of the 1,000g, 500g, 100g, 50g, and 10g weights, and a plastic storage case.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.United Scientific Supplies distributes classroom and professional laboratory equipment for the fields of physics, chemistry, and biology. The company, founded in 1984, is headquartered in Waukegan, Illinois. What’s in the Box? 1,000g500g200g (2)100g50g20g (2)10gPlastic ...

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: STDP6

Certified coating thickness standards are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, Defelsko certified coating thickness standards have measured values traceable to a national metrology institution. Used to verify the accuracy and operation of any type 1 (mechanical) and type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage. Ideal for use in the calibration lab, in the field or on the factory floor. Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box. Individually serialized for traceability to NIST or PTB - includes a certificate of calibration. Certified and labeled in both metric and imperial units. Defelsko P series polystyrene block. For PosiTector 200C. Approximate thickness: 375 micrometer / 15 mils for plate 1; 1.5mm / 60 mils for plate 2; 2.5mm / 100 mils for plate 3; 3mm / 125 mils for plate 4. Coating/substrate: polystyrene blocks. Accuracy: +/- (2.5 micrometer + 0.05 percent of thickness); +/- (0.1 mil + 0.05 percent of thickness). Measures 2-3/4" length by 1-1/2" width.

Manufacturer: Anyload Brand: Anyload Model: 563-YHRT-5k, 10klb

Load Cell for Scales.

Manufacturer: Particles Plus, Inc. Brand: Particles Plus Model: EE-80122A

The aqm series temperature and relative humidity probe provides accurate, reliable, and responsive indication of environmental conditions when attached to the SMART sensor port of the aqm series air quality monitors. Data is conveyed through the SMART peripheral bus and saved in to the air quality monitors Memory for later retrieval and reporting.

Manufacturer: GASCO Brand: Gasco

Stainless Steel regulator for Reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es

Manufacturer: GASCO Brand: Gasco

Stainless Steel regulator for Reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es

Manufacturer: GASCO Brand: Gasco

Stainless Steel regulator for Reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es

Manufacturer: Fowler Brand: Fowler

Features Made from high-grade alloy steel, hardened and ground from 1/32" stock with 2 holes in each parallel. 10 pairs, 6" length, 1/32" width. 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2" .0001" Paired in height: .0001" Hardness: 50 HRC

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe