Calibration - Page 31

Manufacturer: TTC Brand: TTC

Holes furnished throughout unit to facilitate clamping.

Manufacturer: Rice Lake Brand: Rice Lake

The Rice Lake metric, stainless steel, hooked weight, hooked weight has a density of 7.84 and is designed for use with hanging balances, and for applications that include pressure, torque, and tensile strength testing. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets American Society for Testing and Materials (ASTM) E617, Class 6 specification for calibrating brass student weights.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.Rice Lake Weighing Systems manufactures weight-related and process-control equipment for use in research, scientific, and quality control labs. The company, which was founded in 1946 and is headquartered in Rice Lake, WI, meets Inter...

Manufacturer: Troemner Brand: Troemner

Weight, Individual, Stainless Steel 1g weight, stainless steel OIML style, calibrated to OIML Class F1. Weight is provided in a polypropylene case. Supplied with Troemner's NIST/NVLAP Weight Calibration Certificate. This listing is for Each _DELETE_

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: OG0044

Retro-Reflective Sensor, M18 X 1, Threaded Type, Sensing Range 3 M, 2-Wire, Ac/Dc, Operating Voltage: 20...250V Ac/Dc (47...63 Hz V Ac), Light-On Mode, Quick Disconnect, 1/2'' Connector, Polarization Filter, Housing Material: Pbt, Lens Material: Pmma.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 619054

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611823-531

The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 616150-521

The Mitutoyo grade 00 square gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and...

Manufacturer: Fungilab Brand: Fungilab Model: J134

VISCOSITY STANDARD OIL RT1000 Rotational viscometers standard oil.

Manufacturer: HHIP Brand: HHIP Model: 3402-0402

Solid, one piece angle plate is made from hardened steel Square and parallel within 0.0002". Furnished with (13)1/4"-20 tapped holes.

Manufacturer: Hexagon Metrology Brand: Standard Gage