Calibration - Page 311

Manufacturer: Mettler Toledo Brand: Mettler Toledo

A customized 3rd weight for your Mettler Toledo CarePacs. Use the ASTM Class 1 100 milligram weight to perform customized testing such as minimum weight determination. The 3rd weight perfectly fits into your CarePac carrying case.

Manufacturer: Fluke Corporation Brand: Fluke Model: FTP-1

SureGrip fused test probes with built-in replaceable fuses for additional measurement protection. If the probe fuse does blow, these fused test probes will still allow the meter to indicate live voltage, helping to prevent a possible misreading of no voltage present. These modular probes mount onto any standard modular test leads, for instance the Fluke TL221, TL222, or TL224. Rated to CAT III 1000V, these probes have removable tip guards for reduced probe tip exposure. Built in fuses for additional measurement protection. Fluke fuse part number 803293, 1000V, 11A with 20 kA interrupt rating. Probes allow indication of live voltage even with blown fuse. 2mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads. CAT III 1000 V, CAT IV 600 V, 10 A rating. -20 to 50 degree C operating temperature. CSA certified. One year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: FTPL-1 Color: Black/Red

SureGrip fused test probe and test lead set with built-in replaceable fuses for additional measurement protection. If the probe fuse does blow, these fused test probes will still allow the meter to indicate live voltage, helping to prevent a possible misreading of no voltage present. These modular probes ship with the Fluke TL224 silicone test leads. Rated to CAT III 1000 V, these probes have removable tip guards for reduced probe tip exposure. Built in fuses for additional measurement protection, 1000 V, 11 A with 20 kA interrupt rating. Fluke fuse part number 803293. 2mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads. TL224 leads are right angle connector on one end and straight connector on the other with reinforced strain reliefs, 1.5 meter silicone - insulated wire resists heat and cold. -20 to 50 degree C operating temperature. CAT III 1000 V, CAT IV 600 V, 10 A rating. One year warranty. Voltage readings with blown fuse are approximate and vary with the meter impedance. Before and after each measurement, verify presence of blown fuse by checking continuity of the fused test probe. Current mode is non-functional with blown fuse.

Manufacturer: Flexbar Brand: Flexbar

Inspection Gage Ball Sets. Range: 1/8" to 1". Now available in certified Master Set - Calibrated Within 15 Millionths. 26 pairs of Precision Balls ranging from 1/8 to 1 inch Diameter. Chrome steel Hardened to 63RC. Ground and lapped. Grade 25 Accuracy - AFBMA Certified. in a Plastic Case, With 4 wells Provided for odd Sizes. Set includes 1 pair of each Size: 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 13/16, 7/8, 15/16 and 1". 26 pairs in fitted Plastic Case, With Certificate of Conformance.

Manufacturer: HHIP Brand: HHIP Model: 3402-0510

Heat treated and case hardened to HRC 55 to 60. Hardened and precision Ground on all 6 sides of each block. Accuracy with squareness on all sides within .0002" per inch. 23 holes consists of 5 tapped holes that are 5/8"-11 for clamping and 18 untapped holes. Cross drilling design gives minimum weight and maximum strength.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 53-680-000-0

The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-VT04-ELEC-KIT

The Fluke FLK-VT04-ELEC-KIT electrical kit includes a Fluke VT04 visual infrared thermometer, a Model 117 digital multimeter, and a Model 376 clamp meter. The VT04 visual infrared thermometer has a built-in digital camera, hi-low temperature alarms, time-lapse image capture and a measurement range of 14 to 482 degrees F (-10 to +250 degrees C). The thermal heat map has five levels of overlay that enable the operator to locate precisely the area of concern. The built-in digital camera takes time-lapse images and saves up to 10,000 images per gigabyte on a removable micro SD data card (4 GB card included). Images can be exported for long-term records retention or inclusion in reports using the included SmartView analysis and reporting software.The Fluke Model 117 dual-impedance digital multimeter measures true RMS- AC amps and volts, DC amps and volts, continuity, ohms, capacitance, low impedance (LoZ) capacitance, and hertz. The meter has automatic AC/DC volt selection, true RMS AC measurements for accurate measurements on non-linear loads, and minimum, maximum, and average data for recording signal fluctuations. The meter also performs a diode test and measures resistance, continuity, frequency, and capacitance. Low impedance (LoZ) measurements deliver a low impedance input to the circuit, eliminating ghost voltages and improving accuracy. The white backlit LED is suitable for use in low lighting. Non-contact voltage detection speeds measurements. The meter includes test leads, holster, one 9V battery, and instructions. The Fluke 376 true RMS AC/DC clamp meter measures 1,000 amp AC and DC current with the fixed jaw or 2,500 amp AC current with the flexible current probe. True RMS AC voltage and current measurements provide accurate readings on non-linear signals. The iFlex flexible current probe increases the measurement range to 2,500 amp AC and measures awkward-size conductors or in hard-to-reach areas. An integrated low-pass filter and signal processing provide stable readings in noisy electrical environments...

Manufacturer: ABS Import Tools Inc. Brand: HHIP Model: 3900-0029

Made of precision Ground tool steel. Easily expanded to size in openings for quick reference measurements. Lock desired size by set screws provided. Exact size can be set with micrometer. Furnished in fitted plastic case with size range markings. DIMENSION: 3/8~1/2", 1/2~11/16", 11/16~15/16", 15/16~1-5/16", 1-5/16~1-3/4", 1-3/4~2-1/4".

Manufacturer: Shopgsc

A great container for your next geocache hide. It features four easy to use locking snap closure tabs and a water resistant silicone seal to keep water out and the contents dry. The container is made of clear durable plastic for safety and has plenty of room for lots of swag. Measures 7.75" X 5.5" X 2.875".

Manufacturer: United Scientific Supplies Brand: United Scientific Supplies Model: WSAL06

Aluminum hooked mass set with plastic base. Includes: 100g, 50g, 40g, 30g, 20g, and 10g.