Calibration - Page 40

Manufacturer: ROSEMONT Brand: Rosemont

ROSEMONT TG3A2A21AB4K3Q4M5 3051 Pressure Transmitter H7 rated 0-800PSI

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-20

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 5.000 PSI Range.

Manufacturer: Meriam Process Technologies Brand: Meriam Model: MP100KT

Kit includes: a black padded canvas case, 2' non-stretch hose and fittings. Delrin plastic handle prevents body heat transfer. Oversized check valves for smooth controlled operation. Mash proof vent valve (no needle valve); a patented non-oil based lubricant is used on all moving parts. Dual O-Rings on all pistons to ensure zero leakage; 2 year warranty (includes dropping). MV-100 0-28"Hg (depends on barometric pressure). MP-100 O to 100 psi (including and not limited to an inch of water). Connections (2 ports) 1/8" NPT. 2' Hose and 1/4" fitting.

Manufacturer: Fluke Calibration Brand: Fluke Model: 9144-INSB

This inserts are ordered with 9144 Series Metrology Well Calibrators accommodating a variety of metric- and imperial-sized probe diameters.

Manufacturer: Fluke Calibration Brand: Fluke Model: 9142-INST

Fluke 9142-INST Test Insert for the Fluke 9142.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3024451

Fluke 3 phase mini current clamp set for power quality logger. I20/200A Current.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Manufacturer: Fluke Corporation Brand: Fluke Model: 1587/ET62MAX+KIT

This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use the clamp meter and voltage detector to find out more about the problem.

Manufacturer: Fluke Brand: Fluke Model: 87V/IMSK Color: Industrial Multimeter Service Kit

Fluke 87V/IMSK combines the 87V Multimeter with the i400 AC Current Clamp. Together they provide the ability to troubleshoot most industrial problems, providing you with the functionality you need to effectively do your job. Additionally, the 87V/IMSK kit represents a significant savings over buying the items separately. This kit also includes the 80BK-A thermocouple bead probe, TL75 test leads and AC72 alligator clips. Fluke-87V Multimeter has the ability to measure temperature frequency, capacitance 250 µs peak min-max, 6000 counts, 3-3/4 digits. It has a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment. Fluke-i400 AC 400A Current Clamp is a companion to your DMM to measure up to 400 A AC. It has a 1mA/Amp output that guarantees easy reading on you meter. It is the only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating. This clamp is specially designed to offer maximum utility in a very compact shape. It contains 22 of the most useful accessories for making measurements in low energy, electronic applications. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Starrett Brand: Starrett Model: 81563

Angle plates provide a convenient and practical means of clamping and holding work in a vertical position. Their excellent finish and flatness make them very compatible for use with granite surface plate accuracies. The angle plates are available with either 2 or 4 finished faces. The 2-face angle plate has the bottom and the adjacent square face finished flat and square to one another. The 4-face is similar to the 2-face, but has the two adjacent sides finished flat and square to the other two faces, as well as being parallel to each other.