Calibration - Page 59

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0008

HHIP high precision steel plug gage sets with wood custom drawer system features no-go (minus) 001" set increments tool steel: 60/62 HRC 10 Micro finish or better within 0001" round Class ZZ OAL: 2". uses: checking locations, measuring hole sizes and depths, go and no-go gauging, setting micrometers, checking distances between holes.

Manufacturer: Atago Brand: Atago Model: PAL2

Since the measurement range of PAL-2 is Brix 45.0 - 93.0%, it can measure various high concentration samples such as jam, marmalade, jelly, honey and concentrated juice. The International Protection class of PAL-2 is IP65, so it can clean thick samples under running water. When boiling jam or marmalade are measured, the PAL-2 gives steady measurement values as the measurement is repeated for a few times. It is very useful since "zero-setting" (calibration) can be done with water. The feature of PAL-1 are fully covered by NEW PAL-2.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 516-934-26

The Mitutoyo 516-934-26 gage block set includes nine ASME grade 0 steel rectangular gage blocks with nominal size engraved in inches. Blocks included in the set measure .0625", .100", .125", .200", .250", .300", .500", 1", and 2". Grade 0 gage blocks are often used for calibrating and inspecting tools, instruments, and manufacturing gages. This rectangular gage block set meets ASME B89.1.9 standards and a certificate of inspection and calibration is provided with each set. Gage blocks (also called gauge blocks, Jo blocks, Hoke blocks, and Johansson gauges) are precision ground and lapped metal or ceramic blocks, used for calibrating precision measuring equipment and as a length standard in manufacturing. Gage blocks are square or rectangular in shape, with flat and parallel measuring surfaces, and usually have an engraved unique serial number and nominal length (provided in either inches or millimeters). They often come in sets with blocks of varying lengths, so that many different standard lengths can be created by stacking and wringing them. Wringing is the process of sliding blocks together with a small amount of pressure, in order to create a longer gage block stack. Gage blocks are kept within a protective case, are cleaned thoroughly before wringing and after each use to prevent corrosion, and are kept free of burrs and other damage that would decrease their accuracy. Temperature is another important consideration. Blocks are susceptible to thermal expansion and must be used at 68 degrees F to ensure their accuracy. Gage blocks are available in different grades, which refer to their tolerance or allowable deviation from their nominal dimension. Grades are defined by the American Society of Mechanical Engineers (ASME) B89.1.9M for both length and flatness. ASME B89.1.9M also defines standards for parallelism and surface finish. Different grades are available depending on the application and the required level of accuracy. Grade 00 blocks are generally used to calibrate and check the accuracy of instrum...

Manufacturer: LeCroy Corporation Brand: LeCroy Model: DCS015

The DCS015 calibration Source, 100 MHz Bandwidth has both voltage and current time aligned signals, which enables the precise deskew of voltage and current probes. Most voltage probes along with the CP031, CP030 and AP015 are compatible with the DCS015. Risetime (typical) is 8 ns.

Manufacturer: GOODSON Brand: Goodson

Rockwell Hardness Tester

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-179/EDA2 Color: 6 Piece Industrial Electronics DMM Combo Kit

Full featured DMM with advanced electronic troubleshooting functions plus probes and hooks all packed in a sleek, durable carrying case. Kit Includes: Fluke 179 true RMS digital multimeter with backlight, Fluke TL224 silicone test leads, Fluke Tl910 electronic test probes with replacement tips, Fluke AC280 heavy duty hook clips, Fluke 80bk a integrated temperature probe, Fluke C35 durable carrying case, The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view.

Manufacturer: Fluke Corporation Brand: Fluke Model: TL1550EXT

Replacement test lead set for the Fluke 1550B/1550C/1555 MegaohmMeter. 3 test leads (red, black, green) connected to low-leakage probes. 3 alligator clips (red, black, green). Maximum jaw opening: 26mm (1"). Test leads extend to 25'. Cat II 1000 V, Cat III 600 V, 5kV DC max (probes). Cat II 1000 V, Cat III 600 V, 20 amps (alligator clips).

Manufacturer: Gasco Brand: Gasco

Technical Specification Item Calibration Gas Gas Name Hydrogen Chloride, Nitrogen Gas Mixture 50 ppm Hydrogen Chloride, N2 Background Gas Nitrogen Cylinder Capacity 66L Cylinder Material Aluminum Alloy For Use With Any and All OEM Gas Detectors Connection Size C-10 Max. Pressure 1200 psi Cylinder Dia. 2-9/10 Cylinder Height 10-1/2 Accuracy +/-5% Calibration Certificate NIST This listing is for each.

Manufacturer: Gasco Brand: Gasco

Calibration Gas, Gas Name Ammonia, Air, Gas Mixture 200 ppm Ammonia, O2, Background Gas Air, Cylinder Cylinder 66L, Cylinder Material Aluminum Alloy, For Use With Any and All OEM Gas Detectors, Connection Size C-10, Max. Pressure 1200 psi, Cylinder Dia. 2-9/10 In., Cylinder Height 10-1/2 In.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-568

Two-in-one IR and contact thermometers with an innovative dot matrix display. With a simple, 3-button on-screen menu interface (in 6 languages) the digital laser thermometers make even complex measurements easy. Quickly navigate advanced features to adjust emissivity, start data logging, or turn on and off alarms - with just a few pushes of a button. With a rugged, easy-to-use, ergonomic design, the two-in-one contact and non contact thermometers can stand up to tough industrial, electrical, and mechanical environments. These tools go beyond other IR thermometers (or pyrometers), helping you work more efficiently in more applications. Added functionality available only on the 568: Easily trend and analyze data with included FlukeView® Forms software Quickly download stored data with USB connection See your data right away without leaving the site, using the USB and your laptop Extend your battery life by powering the digital thermometer from your laptop via the USB Features and benefits: Measure -40°C to 800°C /-40°F to 1472°F Easily access advanced features with the soft-key buttons and dot-matrix display Measure smaller objects from further away, with a distance-to-spot ratio of 50:1 Compatibility with all standard mini-connector Type-K thermocouples allow you to preserve your thermocouple investments Confidently measure a wide variety of surfaces, with the adjustable emissivity feature, including a built-in material table Capture multiple points of data up to 99, for downloading and recalling later Easily adapt to lighting conditions with 2 levels of backlight Audible and visual alarms instantly alert you to measurements outside of your set limits Quickly identify problems with the MIN, MAX, AVG, and DIF functions Make contact thermometer measurements right away with the included Type-K thermocouple bead probe Confidently troubleshoot equipment with 1 % measurement accuracy Versatile interface with 6 languages from which to choose