|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $43.95
Manufacturer: Anytime Tools
Brand: Anytime Tools
Manufacturer: Anytime Tools
Brand: Anytime Tools
|
Professional Precision Tool An adjustable parallel set is a valuable addition to any toolbox. They are ideal for work on grinding machines, shapers, drill presses, milling machines and many other applications. Take advantage of the versatility of these parallels in gaging, inspection, layout and setups on various professional machine tools for daily use. Exact size can be set with micrometer or expand into slot and measure. Simple adjustment is achieved with the strong locking screws. Parallels are adjustable to the following sizes: 3/8" - 1/2", 1/2" - 11/16", 11/16" - 15/16", 15/16" - 1-5/16", 1-5/16" - 1-3/4", 1-3/4" - 2-1/4". The parallels are 5" long and 1/4" thick. Parallels consist of two sliding pieces that are accurately dovetailed. Features: Six piece adjustable parallel set ranging from 3/8 to 2 1/4 inchesParallels consist of two accurately dovetailed sliding piecesMade of precision ground tool steel with crisp edges and decent finish Easily expanded to size in openings for quick reference measurements Sturdy locking screws allow simple adjustmentParallels consist of two Accurately dovetailed sliding piecesConvenient fitted plastic case with size range markings for reference Dimensions: 3/8~1/2", 1/2~11/16", 11/16~15/16", 15/16~1-5/16", 1-5/16~1-3/4", 1-3/4~2-1/4"
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $44.53 5% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 3402-1031
Manufacturer: HHIP
Brand: HHIP
Model: 3402-1031
3-3/4 X 4 X 5" Non-Slotted Right Angle Plate | Widely used for fixture components. | All faces, ends and edges are finished square and parallel. | The opening provides a convenient hand grip for handling. | Square within 0.0005" per 6". | Parallel within 0.00025" per 6".
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $44.65 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611613-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611613-521
|
The Mitutoyo grade 00 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)], and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measuremen...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $44.65 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611614-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611614-521
|
The Mitutoyo grade 00 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)], and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measuremen...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $44.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: AC72
Manufacturer: Fluke Corporation
Brand: Fluke
Model: AC72
The Fluke alligator clip-set of red and black clips have a pair of nickel plated jaws. The jaws have an 8mm (0.32") opening. Recommended for use with TL71 and TL75 test leads, they are CAT IV 600V, CAT III 1000V, 10A rated and UL listed. The over-molded surfaces and finger-hugging curves give the user a comfortable, reliable grip and improves steadiness in slippery hands. UL listed. The Fluke alligator clips are sold as one set per package.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $45.00 10% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9082/001
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9082/001
One red (signal) and one black (ground) 4mm banana contact. Consists of two adapters. Maximum signal voltage: 600V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. UL Listed.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $46.69 5% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 3402-1203
Manufacturer: HHIP
Brand: HHIP
Model: 3402-1203
2-1/2" Sine Bar | For angles set up by using Sine Bar with 1-2-3 Blocks or Gage Block. | Parallelism: 0.0004". | Working face accuracy 0.00003"/ per inch. | Rolls center distance accuracy 0.0002". | Flange on the end for the resting of workpiece.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $47.35 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611675-551
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611675-551
|
The Mitutoyo grade AS-2 rectangular gage block is made of steel, has a nominal length engraved in metric [millimeter (mm)], and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide mat...
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $48.00
Manufacturer: Rice Lake
Brand: Rice Lake
Manufacturer: Rice Lake
Brand: Rice Lake
|
The Rice Lake painted cast iron, grip handle test weight is available in metric and U.S. customary (also referred to as English and avoirdupois) and is designed for testing field standards and industrial devices. Painted cast iron weight has a chip-resistant paint that is corrosion-resistant and conforms to NIST Handbook 105-1 standards. The weight meets American Society for Testing and Materials (ASTM) E617, Class 7 specification for rough weighing operations in physical and chemical laboratories, and for force-measuring apparatus.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.Rice Lake Weighing Systems manufactures weight-related and process-control equipment for use in research, scientific, and quality control labs. The company, which wa...
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $48.00
Manufacturer: Rice Lake
Brand: Rice Lake
Manufacturer: Rice Lake
Brand: Rice Lake
|
The Rice Lake painted cast iron, grip handle test weight is available in metric and U.S. customary (also referred to as English and avoirdupois) and is designed for testing field standards and industrial devices. Painted cast iron weight has a chip-resistant paint that is corrosion-resistant and conforms to NIST Handbook 105-1 standards. The weight meets American Society for Testing and Materials (ASTM) E617, Class 7 specification for rough weighing operations in physical and chemical laboratories, and for force-measuring apparatus.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.Rice Lake Weighing Systems manufactures weight-related and process-control equipment for use in research, scientific, and quality control labs. The company, which wa...
|
|