|
|
-
4.7 of 5.0 with 49 Reviews
SALE PRICE: $116.70
Manufacturer: INSIZE
Brand: INSIZE
Model: 4112-C6
Manufacturer: INSIZE
Brand: INSIZE
Model: 4112-C6
Individual steel gage block, 6", grade as-2.
-
4.7 of 5.0 with 37 Reviews
SALE PRICE: $116.79
Manufacturer: TTC
Brand: TTC
Manufacturer: TTC
Brand: TTC
-
4.7 of 5.0 with 9 Reviews
SALE PRICE: $118.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 612191-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 612191-541
|
The Mitutoyo grade AS-1 rectangular wear gage block is made of tungsten carbide, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of tungsten carbide, which is harder than steel and ceramic for greater resistance to wear, and is more resistant to thermal expansion for accuracy. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior.This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Jo...
-
4.7 of 5.0 with 238 Reviews
SALE PRICE: $119.99 23% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TLK281
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TLK281
Kit includes (1) Insulation piercing clip set, (1) SureGrip silicone test lead set, (1) SureGrip test probe set, (1) SureGrip alligator clip set, (1) SureGrip large jaw alligator clip set, (1) Soft case. Complete set of test and measurement accessories designed especially for automotive specialists. Use the sharp stainless steel probes to contact the wire conductor or pinpoint tests on a circuit or relay, and the large jaw alligator clips to get a good ground on the engine or to connect to the battery terminals. An extra long set of alligator clips easily grip to the alternator BAT terminal or the S terminals. The set comes with silicone test leads and a case to keep it organized. Tested to 60V DC.
-
4.7 of 5.0 with 29 Reviews
SALE PRICE: $123.60
Manufacturer: Troemner
Brand: Troemner
Manufacturer: Troemner
Brand: Troemner
Weight, Individual, Stainless Steel^ 100g weight, stainless steel OIML style, calibrated to OIML Class F1. Weight is provided in a polypropylene case. Supplied with Troemner's NIST/NVLAP Weight Calibration Certificate. This listing is for Each
-
4.7 of 5.0 with 29 Reviews
SALE PRICE: $123.60
Manufacturer: Troemner
Brand: Troemner
Manufacturer: Troemner
Brand: Troemner
Weight, Individual, Stainless Steel^ 100g weight, stainless steel OIML style, calibrated to OIML Class F1. Weight is provided in a polypropylene case. Supplied with Troemner's NIST/NVLAP Weight Calibration Certificate. This listing is for Each
-
4.7 of 5.0 with 235 Reviews
SALE PRICE: $123.95 19% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TLK-220
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TLK-220
Special value SureGrip Set for industrial applications. Includes two sizes of alligator clips and sharp test probes for reliable connections, test leads and a roomy carry case to hold and protect your meter and all your accessories. All 1000V CAT III, 600V CAT IV rated. Handy all-in-one kit. Kit includes (1) SureGrip Alligator clip set, (1) SureGrip Large jaw alligator clip set, (1) Slim reach test probe set (4 mm), (1) SureGrip silicone test lead set, (1) Large zippered soft case with moveable divider.
-
4.7 of 5.0 with 44 Reviews
SALE PRICE: $124.30 6% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 177-222
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 177-222
-
4.7 of 5.0 with 5 Reviews
SALE PRICE: $126.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611203-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611203-521
|
The Mitutoyo grade 00 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industri...
-
4.7 of 5.0 with 10 Reviews
SALE PRICE: $126.45 14% OFF
Manufacturer: Troemner
Brand: Troemner
Model: 1203
Color: Value Not Found
Manufacturer: Troemner
Brand: Troemner
Model: 1203
Color: Value Not Found
5 lb Class F Test weight
|
|