Calibration - Page 77

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: STDP5

Certified coating thickness standards are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, Defelsko certified coating thickness standards have measured values traceable to a national metrology institution. Used to verify the accuracy and operation of any type 1 (mechanical) and type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage. Ideal for use in the calibration lab, in the field or on the factory floor. Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box. Individually serialized for traceability to NIST or PTB - includes a certificate of calibration. Certified and labeled in both metric and imperial units. Defelsko P series polystyrene block. For PosiTector 6000 FKS, NKS. Approximate thickness: 1.5mm / 60 mils for plate 1; 2.5mm / 100 mils for plate 2; 6.5mm / 250 mils for plate 3; 12mm / 480 mils for plate 4. Coating/substrate: polystyrene blocks. Accuracy: +/- (2.5 micrometer + 0.05 percent of thickness); +/- (0.1 mil + 0.05 percent of thickness). Measures 2-3/4" length by 1-1/2" width.

Manufacturer: HENRY TROEMNER LLC Brand: HENRY TROEMNER LLC Model: 8028

Troemner Electronic Balance Calibration Weights are available in Troemner Ultra Class and ASTM Classes 1 and 4. They are precision crafted of stainless steel with a highly polished finish. The 20kg to 5kg weights are flat on top with a recessed grip handle for easy handling and gripping. Weights from 5kg to 1kg are cylindrical in shape with a groove near the top for easy handling and gripping. Weights below 1kg are straight cylinders. Weights 5kg and below as well as the weight set come in a polypropylene case.

Manufacturer: Fluke Corporation Brand: Fluke Color: T+PRO-1AC KIT

The T+Pro-1AC Electrical Tester and AC Voltage Detector Kit includes the Fluke T+Pro electrical tester for measuring AC and DC voltage to 600V and the Fluke 1AC-II voltage detector to test for energized circuits. The T+Pro electrical tester measures AC and DC voltage to 600V and resistance to 9.99 kilohms, and it indicates voltage via an LED light bar, sound, and vibration. An audible and visible continuity sensor confirms that a circuit conducts electricity. Its LCD screen displays test results, and backlighting helps eliminate light reflections and improves contrast in low-light conditions. A data hold function keeps a reading on the display for recording. It has a built-in flashlight for use in low light, and a GFCI (ground fault circuit interrupter) trip to verify functionality of GFCI circuits or components. It can detect the direction of a rotary field in a three-phase system when measured phase to phase. The unit operates on two AAA batteries, and it has a low-battery indicator that signals when the batteries need to be replaced. It meets International Electrotechnical Commission (IEC) safety standards 61010-1, and is rated for CAT IV installations to 600V, which covers measurements at the source of the low-voltage supply such as electricity meters and overcurrent protection devices, and CAT III installations to 1,000V, which covers items used with enclosed building circuit installations, such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply. It comes with a test lead wrap, a pair of test probes, and instructions.The T+Pro comes with the Fluke 1AC-II voltage detector for detecting AC voltage from 90V to 1,000V. This voltage detector has visible and audible voltage indicators, and it performs a self-test to visually indicate that it is working. The unit automatically turns off after five minutes of nonuse to conserve battery life, and it signals when the meter's batteries need to be replaced. The unit operates on two AAA batteries....

Manufacturer: Fluke Corporation Brand: Fluke Color: T+PRO-1AC KIT

The T+Pro-1AC Electrical Tester and AC Voltage Detector Kit includes the Fluke T+Pro electrical tester for measuring AC and DC voltage to 600V and the Fluke 1AC-II voltage detector to test for energized circuits. The T+Pro electrical tester measures AC and DC voltage to 600V and resistance to 9.99 kilohms, and it indicates voltage via an LED light bar, sound, and vibration. An audible and visible continuity sensor confirms that a circuit conducts electricity. Its LCD screen displays test results, and backlighting helps eliminate light reflections and improves contrast in low-light conditions. A data hold function keeps a reading on the display for recording. It has a built-in flashlight for use in low light, and a GFCI (ground fault circuit interrupter) trip to verify functionality of GFCI circuits or components. It can detect the direction of a rotary field in a three-phase system when measured phase to phase. The unit operates on two AAA batteries, and it has a low-battery indicator that signals when the batteries need to be replaced. It meets International Electrotechnical Commission (IEC) safety standards 61010-1, and is rated for CAT IV installations to 600V, which covers measurements at the source of the low-voltage supply such as electricity meters and overcurrent protection devices, and CAT III installations to 1,000V, which covers items used with enclosed building circuit installations, such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply. It comes with a test lead wrap, a pair of test probes, and instructions.The T+Pro comes with the Fluke 1AC-II voltage detector for detecting AC voltage from 90V to 1,000V. This voltage detector has visible and audible voltage indicators, and it performs a self-test to visually indicate that it is working. The unit automatically turns off after five minutes of nonuse to conserve battery life, and it signals when the meter's batteries need to be replaced. The unit operates on two AAA batteries....

Manufacturer: Flexbar Brand: Flexbar

Magnetic V-Shape Holder. Ideal for Holding round or irregular shapes for Grinding, machining, scribing or Measuring. 150 lbs. of Holding force. 90° Vee on Top. Magnetic attraction on 5 sides. Turn it over and it has slots and vees Topside. Fine precision ground finish

Manufacturer: Starrett Brand: Starrett Model: HT-1300-01

Leeb D Test Block For 3811A

Manufacturer: TTC ECONOMY Brand: TTC ECONOMY

Includes: (2) Reversible swing away clamps.

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: PX9117

Electronic Pressure Sensor, Measuring Range: 0...15 Psi, Process Connection: 1/4''Npt A / M5 I, 3-Wire, Dc, Operating Voltage: 16...32 V Dc, Current Consumption: 18 Ma, 0...10 V Analog, M12 Connector, E1 Compliant, Housing Material: Stainless Steel 316L / 1.4404 Fpm (Viton) Pa Epdm/X (Santoprene), Materials (Wetted Parts): Stainless Steel (303S22) Ceramics Fpm (Viton).

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: PX3227

Electronic Pressure Sensor, Measuring Range: 0...15 Psi, Process Connection: 1/4''Npt A / M5 I, 2-Wire, Dc, Operating Voltage: 9,6...32 V Dc, 4...20 Ma, Quick Disconnect, M12 Connector, E1 Compliant, Housing Material: Stainless Steel 316L / 1.4404 Fpm (Viton) Pa Epdm/X (Santoprene), Materials (Wetted Parts): Stainless Steel (303S22) Ceramics Fpm (Viton).

Manufacturer: Fluke Corporation Brand: Fluke Model: 3460346 Color: Yellow

Fluke IR Windows are the most rugged on the market, with a heavy duty aluminum housing and arc-flash resistance to increase safety when conducting thermal inspections. Engineered and tested to withstand electric-arcs up to 50 kA for 30 cycles. Certified by UL and CSA for Type 3/12 (outdoor) environments in North America, these C-Range windows are tested to withstand the long term aging effects of UV exposure. Certified by SIRA Certification IP65 (outdoor) environments in Europe. The CLIRVU coating-exclusive to Fluke IR Windows-seals the optic prior to assembly to protect against moisture degradation. The Quadraband optic is IR-Fusion compatible, allowing the thermographer to see potential problems in visual light and thermographic mode. Each C-Range window is delivered with an identification plate attached for unique, on-site numbering for rapid location confirmation and faster repairs. Each infrared window comes complete with a security access key, installation instructions and self-adhesive drilling template. Maximum temperature: 659 degrees C. Warranty: lifetime replacement against manufacturing defects.