Calibration - Page 78

Manufacturer: Fluke Corporation Brand: Fluke Model: TL1550B

Replacement test lead set for the Fluke 1550B MegaohmMeter. 3 test leads (red, black, green) connected to low-leakage probes. 3 alligator clips (red, black, green). Maximum jaw opening: 26mm (1"). Length (lead only): 2.6m (8.6'). Cat II 1000 V, Cat III 600 V, 5kV DC max (probes). Cat II 1000 V, Cat III 600 V, 20 amps (alligator clips).

Manufacturer: Fluke Calibration Brand: Fluke Model: 3140-1

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fowler Brand: Fowler

Includes fitted case Features Set of four pairs of parallels are hardened and ground. A must for every shop. Width & height variations: maximum .0004"

Manufacturer: Starrett Brand: Starrett Model: G-81822

To keep surface plates and other precision granite products in top condition, they should be cleaned frequently with starrett cleaner. This helps prevent abrasion of tools by dirt and other foreign particles. The liquid cleaner, which also acts as a degreaser and rust inhibitor, should be used without water to minimize the risk of rusting tools.

Manufacturer: Rice Lake Brand: Rice Lake

The Rice Lake metric, stainless steel test weight set meets American Society for Testing and Materials (ASTM) Class 4 specifications, and is designed for calibrating other weights, or electronic balances and scales. The weight set is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets ASTM E617, Class 4 specification for use as a reference standard for calibrating semi-analytic balances, and for student use. The set of 12 includes one weight each of 500mg, 300mg, 200mg, 100mg, 50mg, 30mg, 20mg, 10mg, 5mg, 3mg, 2mg, and 1mg, tweezers, and a protective case.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.Rice Lake Weighing Systems manufactures weight-related and process-contr...

Manufacturer: Gasco Brand: Gasco

Calibration Gas, Gas Name Pentane, Hydrogen Sulfide, Sulfur Dioxide, Oxygen, Nitrogen, Gas Mixture 25 Percent LEL Pen Sim, 25 ppm H2S, 5 ppm SO2, 19 Percent O2, N2, Background Gas Nitrogen, Cylinder Capacity 44L, Cylinder Material Aluminum Alloy, For Use With Any and All OEM Gas Detectors, Connection Size C-10, Max. Pressure 825 psi, Cylinder Dia. 2-9/10 In., Cylinder Height 10-1/2 In., Accuracy +/-5 Percent, Calibration Certificate NIST RestrictionsHazardous MaterialCalifornia Proposition 65 Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611206-541

The Mitutoyo grade AS-1 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in...

Manufacturer: Fluke Corporation Brand: Fluke Model: FVF-SC2

FlukeView Forms plus Designer allows a user to edit an existing form or create a new form to customize the report to individual needs. To address the increasing demands for reporting and documentation, Fluke presents FlukeView Forms documenting software. FlukeView Forms increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents. The ability of FlukeView Forms to support multiple instruments enables the user to install and learn only one software application in order to use these multiple tools fully. Use the FlukeView Forms plus Designer to customize your reports or add your company logo. Share or store your data with co-workers or clients - print forms, export to other software programs, or have co-workers and clients down load the free FlukeView Demo/Reader to view and interact with your captured data. With USB/IR cable. FlukeView Forms supports the following test tools: 280 Series, 53-II B and 54-II B, 789, 1550B, 1653, 180 Series. Number of standard forms: 9. Able to modify standard forms. Includes FlukeView Forms Designer for customizing forms. Number of multiple meters whose data can be viewed simultaneously: 8. Number of concurrently running instances of FlukeView Forms allowed: 4. Ability to change company name on report. Supports multi-page forms. Requirements: Operating system: Windows 2000, Windows XP, Windows Vista or Windows 7. Minimum PC Hardware: Pentium class or better microprocessor, 32 MB RAM, 70 MB hard disk space (100 MB to install), USB port. Size: 203 x 100 x 50mm.

Manufacturer: Mitutoyo Brand: Mitutoyo

TELESCOPING SET, 5PC, .50 - 5 .90

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-146

SETTING RING, 50MM